The low-speed flying qualities of an experimental STOL configuration were evaluated by using a fixed-base six-degree-of-freedom simulation. The configuration had either an externally blown flap (EBF) wing or an augmentor wing (AW). The AW configuration was investigated with two tails, one sized for the AW configuration and a larger one sized for the EBF configuration. The emphasis of the study was on the 70-knot approach task. The stability and control characteristics were compared with existing criteria. Several control systems were investigated for the normal four-engine condition and for the engine-out transient condition. Minimum control and stall speeds were determined for both the three- and four-engine operation
A two phase piloted simulation study has been conducted in the Ames Vertical Motion Simulator to inv...
An analysis of the influence of engine response characteristics on the approach and landing of an ex...
A piloted simulator investigation of various engine failure compensation concepts for powered-lift S...
A fixed-base simulator study was conducted to determine the flight characteristics of a representati...
Flight characteristics of jet-flap STOL transport aircraft during approach and landin
A fixed-base simulator study was conducted to determine the minimum acceptable level of longitudinal...
A fixed-based simulator study was conducted to determine the low-speed flight characteristics of an ...
A fixed-base simulator program was conducted to define the problems and methods for solution associa...
A moving-base simulator investigation of the problems of recovery and landing of a STOL aircraft aft...
A low speed wind tunnel test was conducted in the Langley V/STOL tunnel to determine the static long...
A piloted simulation study has been made of typical landing approaches with an externally blown flap...
Investigation of the influence of engine response characteristics on approach and landing operations...
Handling qualities criteria and operational performance margins have been determined for the landing...
An existing deHavilland C-8A airplane has been modified into an augmentor wing flight test vehicle. ...
A simulator study of short takeoff and landing (STOL) aircraft was conducted using a model of a defl...
A two phase piloted simulation study has been conducted in the Ames Vertical Motion Simulator to inv...
An analysis of the influence of engine response characteristics on the approach and landing of an ex...
A piloted simulator investigation of various engine failure compensation concepts for powered-lift S...
A fixed-base simulator study was conducted to determine the flight characteristics of a representati...
Flight characteristics of jet-flap STOL transport aircraft during approach and landin
A fixed-base simulator study was conducted to determine the minimum acceptable level of longitudinal...
A fixed-based simulator study was conducted to determine the low-speed flight characteristics of an ...
A fixed-base simulator program was conducted to define the problems and methods for solution associa...
A moving-base simulator investigation of the problems of recovery and landing of a STOL aircraft aft...
A low speed wind tunnel test was conducted in the Langley V/STOL tunnel to determine the static long...
A piloted simulation study has been made of typical landing approaches with an externally blown flap...
Investigation of the influence of engine response characteristics on approach and landing operations...
Handling qualities criteria and operational performance margins have been determined for the landing...
An existing deHavilland C-8A airplane has been modified into an augmentor wing flight test vehicle. ...
A simulator study of short takeoff and landing (STOL) aircraft was conducted using a model of a defl...
A two phase piloted simulation study has been conducted in the Ames Vertical Motion Simulator to inv...
An analysis of the influence of engine response characteristics on the approach and landing of an ex...
A piloted simulator investigation of various engine failure compensation concepts for powered-lift S...