Simulation study of pressure trends in the case of loss of coolant accident in Water Cooled Lithium Lead blanket module

The water-lithium lead interaction implies a direct energy release, which leads to temperature and pressure increase, due to a combined thermal and chemical reaction, and an indirect form of energy release, the hydrogen production, due to secondary chemical reaction involving the initial reaction products. Review and understanding of the knowledge acquired in past studies, experimental works and numerical activities are needed in view of the renewed interest in the Water Cooled Lithium Lead blanket concept and safety issues connected with the fusion reactor design. This paper presents a review of the studies carried out in the past to characterize the potential safety concerns associated with the use of water and lithium-lead eutectic alloy, the main experimental campaigns, and numerical simulations of BLAST Test No. 5 performed by SIMMER-III code. As results, no code was found able to perform a satisfactory post-test analysis of separate effect experiments, without engineering assumptions. Therefore, a code model for the exothermic reaction and hydrogen production, and experimental data are needed for solving the WCLL blanket safety issues associated with the water-PbLi interaction