Electrical properties of fluidified portland cement mixes in the early stage of hydration

The electrical conductivity and the dielectric constant of cement mixes have been studied in the initial stages of setting to correlate the time evolution of the electrical parameters with the chemical and microstructural modifications. The formulations, based on a mix of Portland cement and microsilica, were fluidified with various amounts of an acrylic polyelectrolite and had a w/c ratio of 0.24. Measurements were carried out at ambient temperature for times of up to 40 h, in the frequency interval 30 Hz–200 kHz. The conductivity showed a marked decrease correlated with the loss of connectivity of the macroscopic porosity (depercolation). The time to the drop of conductivity depended linearly on the concentration of superplasticizer whose retarding effect was clearly evidenced. A dielectric amplification phenomenon was observed which vanished after the porosity depercolated. The temperature profiles of mixtures with different concentrations of the superplasticizer were drawn and a simple model was developed to compute the specific thermal power as a function of time. A substantial coincidence was found, on the time axis, between depercolation and maximum rate of setting. Vicat tests were also carried out