In this work the performance and durability of a new generation of greenhouse covers, in which the cover is composed of five layers, are investigated. A sand wind ageing was performed under different exposure conditions. Surface morphology and chemical, physical, and thermal characteristics were investigated by using optical microscopy, FTIR, and tensile test techniques. In addition, the mechanical integrity of the five-layer film was assessed. The analysis indicated that the sand wind treatments have a significant influence only on the performance of the film. An attempt has been done to compare the properties of the five-layer film with the monolayer and trilayer films with or without air bubble under similar conditions.Theresults re...
During protected cultivation, the use of agrochemicals influences the degradation of the greenhouse...
Greenhouse plastic films are subjected to degradation due to their exposure to solar radiation and t...
In this research, optical and mechanical properties of three different types of (polyethylene) PE pl...
In this work the performance and durability of a new generation of greenhouse covers, in which the c...
In this work the performance and durability of a new generation of greenhouse covers, in which the c...
The effect of sand wind ageing simulation performed under different conditions for a five-layer film...
This work aims at studying the degradable effect of artificial ageing on tri-layer polyethylene film...
This work aims at studying the degradable effect of artificial ageing on tri-layer stabilised lowden...
AbstractThis work aims at studying the degradable effect of natural and artificial ageing on tri-lay...
AbstractThe mono-layer low density polyethylene LDPE films are often used as a cover for the greenho...
Department of Agricultural Engineering, College of Food and Agricultural Sciences, King Saud Univers...
The research aims to investigate the effects of natural and accelerated weathering on polyethylene-b...
The effect of sand wind ageing simulation performed under different conditions for a five-layer film...
The mono-layer low density polyethylene LDPE films are often used as a cover for the greenhouses. Re...
The low-density polyethylene films used for greenhouse roof were naturally weathered for 9 months in...
During protected cultivation, the use of agrochemicals influences the degradation of the greenhouse...
Greenhouse plastic films are subjected to degradation due to their exposure to solar radiation and t...
In this research, optical and mechanical properties of three different types of (polyethylene) PE pl...
In this work the performance and durability of a new generation of greenhouse covers, in which the c...
In this work the performance and durability of a new generation of greenhouse covers, in which the c...
The effect of sand wind ageing simulation performed under different conditions for a five-layer film...
This work aims at studying the degradable effect of artificial ageing on tri-layer polyethylene film...
This work aims at studying the degradable effect of artificial ageing on tri-layer stabilised lowden...
AbstractThis work aims at studying the degradable effect of natural and artificial ageing on tri-lay...
AbstractThe mono-layer low density polyethylene LDPE films are often used as a cover for the greenho...
Department of Agricultural Engineering, College of Food and Agricultural Sciences, King Saud Univers...
The research aims to investigate the effects of natural and accelerated weathering on polyethylene-b...
The effect of sand wind ageing simulation performed under different conditions for a five-layer film...
The mono-layer low density polyethylene LDPE films are often used as a cover for the greenhouses. Re...
The low-density polyethylene films used for greenhouse roof were naturally weathered for 9 months in...
During protected cultivation, the use of agrochemicals influences the degradation of the greenhouse...
Greenhouse plastic films are subjected to degradation due to their exposure to solar radiation and t...
In this research, optical and mechanical properties of three different types of (polyethylene) PE pl...