Intermetallic phases in high purity Al 10Si 0.3Fe cast alloys with and without Sr modification studied by FIB tomography and TEM

Structure and chemical composition of intermetallic phases in unmodified and Sr modified Al 10Si 0.3Fe casting alloys based on pure elements are identified by transmission electron microscopy and energy dispersive X ray spectroscopy. A three dimensional characterization of intermetallic phases is performed by focused ion beam tomography. Both alloys were found to contain Fe rich a Al14Fe3Si2 with a bcc structure and the t2 phase Al4.5FeSi, also called g phase AlFeSi and both exhibit the Chinese script morphology in two dimensions, appearing as complex shaped objects in three dimension visualizations. The crystal structure of the t2 phase is shown to be trigonal R centred rather than monoclinic as claimed by all published studies. It is related to the structure of R phases such as Mn85.5Si14.5. In the Sr modified alloy, the tetragonal d Al4FeSi2 phase is observed, which appears as thin platelets in 3D. No monoclinic b Al5FeSi phase is found in any of the alloys unlike in industrial alloys that contain further impurities Mn, Cr, Cu, P . Thus, the common b phase is not a feature of the pure Al Si Fe system. In summary, addition of the modifier strontium to Al 10Si 0.3Fe alloys containing no further alloying elements markedly promotes the formation of d Al4FeSi2, but suppresses the formation of a Al14Fe3Si2, whereas t2 phase Al4.5FeSi is found in similar fractions in both alloy