Indoor climate analysis for urban mobility buses: a CFD model for the evaluation of thermal comfort

Abstract: The aim of this work is to analyze the indoor climate in city buses; the study was developed by numerical simulation and experimental validation carried out on the urban mobility buses of the city of Rome (Italy). Several factors have contributed to increase the concern about the comfort evaluation in vehicles and particularly in city buses. Due to the rising of the mobility needs, time that people spend in vehicles has grown substantially. The thermal environment in urban buses also varies greatly: passengers are exposed to local heating and/or cooling due to vertical temperature gradients, radiant asymmetry and local unexpected airflow. The interaction of the cabin thermal environment, created by the HVAC-system, the outdoor conditions as well as the occupants is rather complex. At the moment no standards exist for assessment and classi-fication of the thermal environment quality in vehicles. To obtain some evidences, in order to enhance the indoor climate for a city bus and to improve occupants ’ comfort monitoring local temperature and air distribution around passengers, we have developed a mathematical model. The numerical model was implemented with Computational Fluid Dynamic software (CFD, Fluent Inc.): it permits the evaluation of the thermal and fluid-dynamic performances of the air conditioning system and diffusers ’ distribution. To gain a deeper understanding of the local climate comfort, the numerical simulation results were experimentally validated by several measurements inside the urban buses performed under real operative conditions during the summer season.The experimental results are in good agreement with the CFD evidences. This shows that the mode