Abstract. Nickel-Iron nanocrystalline alloys with different grain sizes were fabricated by electrodeposition technique. In this study, influence of the grain size nanocrystalline NiFe deposits on saturation magnetization Ms and coercivity Hc was investigated. Alternating gradient magnetometer (AGM) with up to 10 kOe applied magnetic field was used to study the magnetic properties of NiFe film. The results showed that saturation magnetization Ms and coercivity Hc were affected by grain size variation. Increase in grain size increased the saturation magnetization. The largest grain size of 18.6 nm showed the highest Ms of 138 emu/g, while the smallest grain size of 7.2 nm showed Ms of 94 emu/g. Minimum coercivity of 3.847 Oe was observed for ...
The effect of grain size on the deformation twinning and de-twinning in a nanocrystalline Ni-Fe allo...
The corrosion behaviour of electrodeposited nanocrystalline Ni, 85Ni-15Fe, 80Ni-20Fe and 45Ni-55Fe w...
International audiencePlanetary ball mill PM 400 from Retsch (with different milling times for X = 4...
Nanocrystalline Ni-Fe deposits with different composition and grain sizes were fabricated by electro...
The thickness variations of NiFe based magnetic core and its effects on magnetic properties have bee...
We report here the investigations on the size dependent variation of magnetic properties of nickel f...
The correlation between the crystal/defect and the magnetic domain structure of nanocrystalline (nc)...
In order to improve soft magnetic properties of electrodeposited Fe-Ni films prepared in a citric-ac...
The structure, chemical composition, and magnetic properties of electrochemically deposited nanocrys...
Nickel-Iron (Ni-Fe) based alloys exhibit low coercivity, high permeability and high saturation magne...
A systematic investigation into the structure and properties of five commercially available nickel-...
Nickel ferrite nanoparticles were annealed in order to find dependence of electric/magnetic properti...
Several ribbons of composition Fe73.5Cu1Nb 3Si16.5B6 and Fe73.5Cu1 Nb3Si13.5B9 were prepared by anne...
The thickness dependence of magnetic properties of NiFe alloys electrodeposited on polycrystalline c...
Ni3Fe alloy with different grain sizes has been formed by mechanical alloying technique using a high...
The effect of grain size on the deformation twinning and de-twinning in a nanocrystalline Ni-Fe allo...
The corrosion behaviour of electrodeposited nanocrystalline Ni, 85Ni-15Fe, 80Ni-20Fe and 45Ni-55Fe w...
International audiencePlanetary ball mill PM 400 from Retsch (with different milling times for X = 4...
Nanocrystalline Ni-Fe deposits with different composition and grain sizes were fabricated by electro...
The thickness variations of NiFe based magnetic core and its effects on magnetic properties have bee...
We report here the investigations on the size dependent variation of magnetic properties of nickel f...
The correlation between the crystal/defect and the magnetic domain structure of nanocrystalline (nc)...
In order to improve soft magnetic properties of electrodeposited Fe-Ni films prepared in a citric-ac...
The structure, chemical composition, and magnetic properties of electrochemically deposited nanocrys...
Nickel-Iron (Ni-Fe) based alloys exhibit low coercivity, high permeability and high saturation magne...
A systematic investigation into the structure and properties of five commercially available nickel-...
Nickel ferrite nanoparticles were annealed in order to find dependence of electric/magnetic properti...
Several ribbons of composition Fe73.5Cu1Nb 3Si16.5B6 and Fe73.5Cu1 Nb3Si13.5B9 were prepared by anne...
The thickness dependence of magnetic properties of NiFe alloys electrodeposited on polycrystalline c...
Ni3Fe alloy with different grain sizes has been formed by mechanical alloying technique using a high...
The effect of grain size on the deformation twinning and de-twinning in a nanocrystalline Ni-Fe allo...
The corrosion behaviour of electrodeposited nanocrystalline Ni, 85Ni-15Fe, 80Ni-20Fe and 45Ni-55Fe w...
International audiencePlanetary ball mill PM 400 from Retsch (with different milling times for X = 4...