The thermal properties of short Nylon-6 fiber-reinforced Styrene butadiene rubber (SBR) composites were studied by Thermogravimetric Analysis (TGA). The effect of epoxy-based bonding agent on thermal degradation of the gum and the compo-sites was also studied. The thermal stability of the SBR was enhanced in the pres-ence of Nylon-6 fibers and the stability of the composites increased in the presence of bonding agent. The epoxy resin did not significantly change the thermal stab-ility of SBR gum vulcanizate. Results of kinetic studies showed that the degradati-on of SBR and the short nylon fiber-reinforced composites with and without bonding agents followed first-order kinetics
The introduction of epoxy groups into the main chain of elastomers has emerged as a promising altern...
Acrylonitrile butadiene rubber (NBR) composites are prepared from waste nylon 66 short fiber using a...
It is well known that the tire performance properties can deteriorate in the processes of production...
The thermal properties of short Nylon-6 fiber-reinforced Styrene butadiene rubber (SBR) composites w...
The thermal degradation of short nylon-6 fiber reinforced acrylonitrile butadiene rubber (NBR) compo...
The thesis describes the development and evaluation of epoxy resin as interfacial bonding agent for ...
The thermal degradation of short polyester fiber reinforced polyurethane composites with and without...
The thermal degradation of short kevlar fibre-thermoplastic polyurethane (TPU) composites has been s...
The thesis describes studies on development of short Nylon-6 fibre composites based on rubber-tough...
A series of rubber composites were prepared by blending styrene-butadiene rubber (SBR) latex and the...
ABSTRACT: The influence of polypropylene fibers on the thermal degradation of epoxy composites was i...
Ceramifiable styrene-butadiene (SBR)-based composites containing low-softening-point-temperature gla...
The thesis deals with the development of short nylon fiber-reclaimed rubber/elastomer composites. Th...
A composite material was prepared from epoxy resin as a base material with the reinforcing materials...
The present study deals with the characterization of the polymeric materials viz., nylon-66 and 30% ...
The introduction of epoxy groups into the main chain of elastomers has emerged as a promising altern...
Acrylonitrile butadiene rubber (NBR) composites are prepared from waste nylon 66 short fiber using a...
It is well known that the tire performance properties can deteriorate in the processes of production...
The thermal properties of short Nylon-6 fiber-reinforced Styrene butadiene rubber (SBR) composites w...
The thermal degradation of short nylon-6 fiber reinforced acrylonitrile butadiene rubber (NBR) compo...
The thesis describes the development and evaluation of epoxy resin as interfacial bonding agent for ...
The thermal degradation of short polyester fiber reinforced polyurethane composites with and without...
The thermal degradation of short kevlar fibre-thermoplastic polyurethane (TPU) composites has been s...
The thesis describes studies on development of short Nylon-6 fibre composites based on rubber-tough...
A series of rubber composites were prepared by blending styrene-butadiene rubber (SBR) latex and the...
ABSTRACT: The influence of polypropylene fibers on the thermal degradation of epoxy composites was i...
Ceramifiable styrene-butadiene (SBR)-based composites containing low-softening-point-temperature gla...
The thesis deals with the development of short nylon fiber-reclaimed rubber/elastomer composites. Th...
A composite material was prepared from epoxy resin as a base material with the reinforcing materials...
The present study deals with the characterization of the polymeric materials viz., nylon-66 and 30% ...
The introduction of epoxy groups into the main chain of elastomers has emerged as a promising altern...
Acrylonitrile butadiene rubber (NBR) composites are prepared from waste nylon 66 short fiber using a...
It is well known that the tire performance properties can deteriorate in the processes of production...