The effects of warp tension, number of filaments, and luster of viscose warp yarns, and the effects of number of picks and denier of viscose filling yarns of 32 woven fabrics on the weight, construction, breaking strength, and elongation of yarns, and on the breaking strength (grab and strip), elongation (strip), tearing strength (tongue), crimp, seam slippage, crease recovery, resistance to abrasion, and air permeability of fabrics were evaluated. The relationship be-between strip strength, S, strip elongation, E, and grab strength, G, was found to be The relationship between resistance to abrasion, log R, picks per inch, P, and denier of filling, D, was found to be equally well expressed by the following equations: The relationship betwee...
The effect of crease resistant finish on wrinkle recovery, breaking strength, tearing strength and p...
In order to determine the relationship between the fiber properties of the yarn quality in the artic...
The aim of this study was to understand the effects of softening treatment on pull-out properties of...
150-155Viscose rayon yarns after being dyed exhibited a decrease in hairiness, breaking strength, b...
29-35Uniaxial tensile behaviour of woven fabrics made up of two-ply cotton warp and single/two-ply c...
A detailed experimental work was carried out to find the relationship between the tensile strength o...
105-110<span style="font-size:11.0pt;line-height:115%; font-family:" calibri","sans-serif";mso-asci...
During sewing at high speed, the needle thread is subjected to repeated tensile stresses, heat, bend...
In this study, “An Investigation on Different Physical Properties of Cotton Woven Fabrics”, some sam...
69-75The deformation characteristics of fabrics in relation to relative thread density have been stu...
The main parameters of tensile tests for fabrics and yarns are the breaking force and the elongation...
107-108<span style="font-size:11.0pt;line-height:115%; font-family:" calibri","sans-serif";mso-asci...
The need has recently increased for the land-based fabrics (towels), as they represent a broad secto...
Fabric properties such as pilling and abrasion resistance and tensile strength vary when greige fabr...
The effect of crease resistant finish on wrinkle recovery, breaking strength, tearing strength and p...
The effect of crease resistant finish on wrinkle recovery, breaking strength, tearing strength and p...
In order to determine the relationship between the fiber properties of the yarn quality in the artic...
The aim of this study was to understand the effects of softening treatment on pull-out properties of...
150-155Viscose rayon yarns after being dyed exhibited a decrease in hairiness, breaking strength, b...
29-35Uniaxial tensile behaviour of woven fabrics made up of two-ply cotton warp and single/two-ply c...
A detailed experimental work was carried out to find the relationship between the tensile strength o...
105-110<span style="font-size:11.0pt;line-height:115%; font-family:" calibri","sans-serif";mso-asci...
During sewing at high speed, the needle thread is subjected to repeated tensile stresses, heat, bend...
In this study, “An Investigation on Different Physical Properties of Cotton Woven Fabrics”, some sam...
69-75The deformation characteristics of fabrics in relation to relative thread density have been stu...
The main parameters of tensile tests for fabrics and yarns are the breaking force and the elongation...
107-108<span style="font-size:11.0pt;line-height:115%; font-family:" calibri","sans-serif";mso-asci...
The need has recently increased for the land-based fabrics (towels), as they represent a broad secto...
Fabric properties such as pilling and abrasion resistance and tensile strength vary when greige fabr...
The effect of crease resistant finish on wrinkle recovery, breaking strength, tearing strength and p...
The effect of crease resistant finish on wrinkle recovery, breaking strength, tearing strength and p...
In order to determine the relationship between the fiber properties of the yarn quality in the artic...
The aim of this study was to understand the effects of softening treatment on pull-out properties of...