Investigation of Rotor Loads and Vibration at Transition Speed, American Helicopter Society 58th Annual Forum

Blade section normal force and ap bending moment were investigated for UH-60 Black Hawk helicopter rotor operating at transition speed. The measured data from both ight and full-scale wind tunnel tests are compared with calculations obtained using the comprehensive rotorcraft analysis CAMRAD II. There is good agreement for the oscillatory ap bending moments between the ight and wind tunnel tests when the rotor in the wind tunnel was trimmed to match thrust and pitch and roll moments measured on the main rotor shaft in the ight test. The calculations were made using three free wake models: rolled-up, multiple-trailer, and multiple-trailer with consolidation wake models. Both multiple-trailer and multiple-trailer with consolidation models improve the normal force correlation qualitatively, and the magnitude of 1/rev and 2/rev harmonics of ap bending moments. However, none of these wake models appear to be adequate for the accurate prediction of rotor-induced vibration. Notation Cp power coefcient CT rotor thrust coefcient Cw weight coefcient G strength of trailed vorticity r blade radial station rC centroid of vorticity rG moment (radius of gyration) of vorticity R bade radius γ ight path angle Γ bound circulation µ advance ratio σ solidit