ABSTRACT: Currently, the NFPA standard for the installation of sprinkler systems (NFPA 13) requires that early suppression fast response (ESFR) sprinklers be specifically listed for use with antifreeze mixtures due to the concern that antifreeze will contribute to the combustion energy of the fire. The effectiveness of an ESFR sprinkler system in suppressing a fire depends on the antifreeze concentration, sprinkler discharge characteristics, rate of discharge, duration of antifreeze mixture flow before water flow without antifreeze, storage arrangement, and protected commodity. A series of three large-scale rack-storage fire tests has been conducted to evaluate the effectiveness of two different ESFR sprinklers using certain discharge rates...
Government Code section 11346.1 mandates that any finding of emergency shall include a written state...
This paper briefly describes the test facility and the test method which has been used to investigat...
The Extra Large Orifice (ELO) sprinkler was developed for use in lieu of standard, ½ in. ...
Sprinkler protection is currently the most widely used and reliable technology to mitigate fire haza...
Class A foam is often used in the suppression of wildland and structural fires, with manual applicat...
Compressed-air foam (CAF) has been proven to be an effective fire suppression material for both clas...
II Performance based methodologies are becoming increasingly common in fire safety due to the inabil...
A known fact is that the water sprinklers cool down the fire and also the structures. In most countr...
This paper presents data relating to the performance of sprinklers and detectors in real office fire...
Large-scale fire tests were conducted to evaluate K-factor * 360 (K25.2), suppression-mode sprinkler...
AbstractFire disasters occurred in large commercial buildings usually cause heavy casualties and pro...
The effectiveness of sprinklers in protecting hospital patients in the room of fire origin was inves...
A series of experiments at the National Fire Laboratory (NFL), measured the effects of water spray f...
system, based on an overhead fixed-pipe installation, and presents results showing its fire suppress...
Due to increasing challenges in protecting high commodity storage, sprinkler designers need improved...
Government Code section 11346.1 mandates that any finding of emergency shall include a written state...
This paper briefly describes the test facility and the test method which has been used to investigat...
The Extra Large Orifice (ELO) sprinkler was developed for use in lieu of standard, ½ in. ...
Sprinkler protection is currently the most widely used and reliable technology to mitigate fire haza...
Class A foam is often used in the suppression of wildland and structural fires, with manual applicat...
Compressed-air foam (CAF) has been proven to be an effective fire suppression material for both clas...
II Performance based methodologies are becoming increasingly common in fire safety due to the inabil...
A known fact is that the water sprinklers cool down the fire and also the structures. In most countr...
This paper presents data relating to the performance of sprinklers and detectors in real office fire...
Large-scale fire tests were conducted to evaluate K-factor * 360 (K25.2), suppression-mode sprinkler...
AbstractFire disasters occurred in large commercial buildings usually cause heavy casualties and pro...
The effectiveness of sprinklers in protecting hospital patients in the room of fire origin was inves...
A series of experiments at the National Fire Laboratory (NFL), measured the effects of water spray f...
system, based on an overhead fixed-pipe installation, and presents results showing its fire suppress...
Due to increasing challenges in protecting high commodity storage, sprinkler designers need improved...
Government Code section 11346.1 mandates that any finding of emergency shall include a written state...
This paper briefly describes the test facility and the test method which has been used to investigat...
The Extra Large Orifice (ELO) sprinkler was developed for use in lieu of standard, ½ in. ...