Abstract This work aims to analytically and numerically study the parameters affecting on the wire drawing process using a 3D finite element model and the effect of these parameters on drawing force. Three-dimensional finite element model using DEFORM-3D V6.1 was built to simulate this process. AL-1100 wire was drawn through a conical die with semi-die angle ( α = 6 ° , 8 ° , 8.5 ° , 9 ° , 9.5 °, 10°,, 15 °), reduction ratio ( r = 0.1, 0.15, 0.2, 0.25, 0.3), friction coefficient ( µ = 0.1, 0.08, 0.075, 0.07, 0.065, 0.06, 0.05), bearing length ( BL = 0.5, 0.75, 1, 1.25, 1.6) mm
Roll drawing is a technological process that allows to obtain a notable reduction of the drawing for...
This paper “SIMULATION OF THE EFFECT OF DIE RADIUS ON DRAWING PROCESS” is one of the most used Metal...
A trefilação de barras de aço é usualmente utilizada para conferir precisão dimensional e melhores p...
In this final year project (FYP), single stage and multi stages wire drawing simulation were carried...
AbstractA complex study of the drawing process with cassette roller die, of the round wires is prese...
Finite element method is a numerical analysis tool for analyzing complex problems. It was originally...
[[abstract]]This paper employs rigid-plastic finite element (FE) DEFORMTM 2D software to investigate...
The paper deals with the finite element simulation of wire drawing processes with focus on unalloyed...
This study proposes a cold drawing technology of wire rod with rotating die; it carries out an FEM s...
The drawing process of steel bars is usually used to check better dimensional accuracy and mechanica...
The main goal of this work is to present a three-dimensional mechanical model for the numerical simu...
Wire drawing is a metal forming operation which involves pulling a metal rod or wire through the die...
[[abstract]]In wire drawing processes, many factors must be controlled to obtain the required plasti...
The paper focuses the attention on the micro-wire drawing process; the research includes both experi...
Use of computer programs based on finite element methods for simulations of plastic working processe...
Roll drawing is a technological process that allows to obtain a notable reduction of the drawing for...
This paper “SIMULATION OF THE EFFECT OF DIE RADIUS ON DRAWING PROCESS” is one of the most used Metal...
A trefilação de barras de aço é usualmente utilizada para conferir precisão dimensional e melhores p...
In this final year project (FYP), single stage and multi stages wire drawing simulation were carried...
AbstractA complex study of the drawing process with cassette roller die, of the round wires is prese...
Finite element method is a numerical analysis tool for analyzing complex problems. It was originally...
[[abstract]]This paper employs rigid-plastic finite element (FE) DEFORMTM 2D software to investigate...
The paper deals with the finite element simulation of wire drawing processes with focus on unalloyed...
This study proposes a cold drawing technology of wire rod with rotating die; it carries out an FEM s...
The drawing process of steel bars is usually used to check better dimensional accuracy and mechanica...
The main goal of this work is to present a three-dimensional mechanical model for the numerical simu...
Wire drawing is a metal forming operation which involves pulling a metal rod or wire through the die...
[[abstract]]In wire drawing processes, many factors must be controlled to obtain the required plasti...
The paper focuses the attention on the micro-wire drawing process; the research includes both experi...
Use of computer programs based on finite element methods for simulations of plastic working processe...
Roll drawing is a technological process that allows to obtain a notable reduction of the drawing for...
This paper “SIMULATION OF THE EFFECT OF DIE RADIUS ON DRAWING PROCESS” is one of the most used Metal...
A trefilação de barras de aço é usualmente utilizada para conferir precisão dimensional e melhores p...