Restorative Dentistry Corresponding author:

Effect of curing mode on the hardness of dual-cured composite resin core build-up materials Abstract: This study evaluated the Knoop Hardness (KHN) values of two dual-cured composite resin core build-up materials and one resin ce-ment exposed to different curing conditions. Two dual-cured core build-up composite resins (LuxaCore-Dual, DMG; and FluoroCore2, Dent-sply Caulk), and one dual-cured resin cement (Rely X ARC, 3M ESPE) were used in the present study. The composite materials were placed into a cylindrical matrix (2 mm in height and 3 mm in diameter), and the speci-mens thus produced were either light-activated for 40 s (Optilux 501, De-metron Kerr) or were allowed to self-cure for 10 min in the dark (n = 5). All specimens were then stored in humidity at 37°C for 24 h in the dark and were subjected to KHN analysis. The results were submitted to 2-way ANOVA and Tukey’s post-hoc test at a pre-set alpha of 5%. All the light-activated groups exhibited higher KHN values than the self-cured ones (p = 0.00001), regardless of product. Among the self-cured groups, both composite resin core build-up materials showed higher KHN values than the dual-cured resin cement (p = 0.00001). LuxaCore-Dual ex-hibited higher KHN values than FluoroCore2 (p = 0.00001) when they were allowed to self-cure, while no significant differences in KHN values were observed among the light-activated products. The results suggest that dual-cured composite resin core build-up materials may be more re-liable than dual-cured resin cements when curing light is not available. Descriptors: Post and core technique; Resin cements; Composite resins; Hardness