The corrosion films on iron in aqueous carbonate/bicarbonate solutions were studied as a function of concentration, pH, and temperature by using the technique of surface-enhanced Raman spectroscopy with electrodeposited silver. Both Fe(OH), and Fe,04 were detected in the surface oxide film at prepassivation potentials. Iron carbonate (siderite) was observed in the corrosion film in a limited PH, temperature, and applied potential range. At lower carbonate/bicarbon-ate concentration (e.g., 0.01 lid), passivation was lost, and continuous anodic dissolution of the iron occurred. The cathod-ic reduction of the corrosion film was enhanced at 7 5°C
Application of a cathodic current on a rebar in concrete is often used to produce (consume) hydroxyl...
Surface-enhanced Raman spectroscopy (SERS) at a silver electrode has been applied in the chemical an...
Since the reinforced Portland cement (PC) concrete was first used in 1854, it has been the most popu...
We have extended our unenhanced (non-SERS) Raman spectroscopic investigations to include a study of ...
We have explored the un-enhanced Raman spectra of both single and twin electrodes in 3.5% NaCl solut...
In-situ Raman spectra of the passive oxide film in neutral borate solution at pH 8.4 was measured wi...
In situ Raman spectroscopy and rotating split-ring disk electrode were used to identify products for...
In situ Raman and reflectance spectra of iron electrodes in borate buffer pH 8.4 containing 2,2 &apo...
Raman spectroscopy in a confocal microscope was used to study electrochemically synthesized corrosio...
Water reduction on corroded iron surfaces is technologically and fundamentally important. Here, the ...
Water reduction on corroded iron surfaces is technologically and fundamentally important. Here, the ...
Water reduction on corroded iron surfaces is technologically and fundamentally important. Here, the ...
International audienceIn several contexts such as cultural heritage, oil and gas or nuclear waste di...
International audienceIn several contexts such as cultural heritage, oil and gas or nuclear waste di...
The composition of the surface film formed on pure iron was investigated in a solution of 0.05M NaOH...
Application of a cathodic current on a rebar in concrete is often used to produce (consume) hydroxyl...
Surface-enhanced Raman spectroscopy (SERS) at a silver electrode has been applied in the chemical an...
Since the reinforced Portland cement (PC) concrete was first used in 1854, it has been the most popu...
We have extended our unenhanced (non-SERS) Raman spectroscopic investigations to include a study of ...
We have explored the un-enhanced Raman spectra of both single and twin electrodes in 3.5% NaCl solut...
In-situ Raman spectra of the passive oxide film in neutral borate solution at pH 8.4 was measured wi...
In situ Raman spectroscopy and rotating split-ring disk electrode were used to identify products for...
In situ Raman and reflectance spectra of iron electrodes in borate buffer pH 8.4 containing 2,2 &apo...
Raman spectroscopy in a confocal microscope was used to study electrochemically synthesized corrosio...
Water reduction on corroded iron surfaces is technologically and fundamentally important. Here, the ...
Water reduction on corroded iron surfaces is technologically and fundamentally important. Here, the ...
Water reduction on corroded iron surfaces is technologically and fundamentally important. Here, the ...
International audienceIn several contexts such as cultural heritage, oil and gas or nuclear waste di...
International audienceIn several contexts such as cultural heritage, oil and gas or nuclear waste di...
The composition of the surface film formed on pure iron was investigated in a solution of 0.05M NaOH...
Application of a cathodic current on a rebar in concrete is often used to produce (consume) hydroxyl...
Surface-enhanced Raman spectroscopy (SERS) at a silver electrode has been applied in the chemical an...
Since the reinforced Portland cement (PC) concrete was first used in 1854, it has been the most popu...