The transparent conductive oxide (TCO) electrode is an important part of organic light-emitting diodes (OLEDs), especially for the OLEDs based on flexible substrate. We fabricated indium tin oxide (ITO)/Ag/ITO multilayer films deposited on polyethylene terephthalate (PET) film by using sputtering technique at room temperature in order to achieve high transmittance and low sheet resistance for application to flexible OLED devices. The OLEDs made with ITO/Ag/ITO multilayer deposited on flexible film exhibited lower operating voltage and higher current efficiency than the OLEDs made with commercial single layer ITO glass substrateclose
Indium-tin oxide (ITO) thin layers are obtained by an IBS (Ion Beam Sputtering) deposition process....
Indium-tin oxide (ITO) thin layers are obtained by an IBS (Ion Beam Sputtering) deposition process....
Transparent and conducting ITO/Ag/ITO (IAI) multilayer coatings were deposited on glass and flexible...
Transparent conductive ITO/Ag/ITO multilayer thin films were successfully deposited on polyethylene ...
International audienceIn this study, we presented high-performance flexible organic light-emitting d...
In this study polyethylene naphthalate(PEN) and polyethersulfone(PES) films were chosen as a flexibl...
International audienceIndium-tin oxide (ITO) thin layers are obtained by an IBS (Ion Beam Sputtering...
International audienceIndium-tin oxide (ITO) thin layers are obtained by an IBS (Ion Beam Sputtering...
The broad application of flexible optoelectronic devices is still hampered by the lack of an ITO fre...
The broad application of flexible optoelectronic devices is still hampered by the lack of an ITO fre...
The broad application of flexible optoelectronic devices is still hampered by the lack of an ITO fre...
The broad application of flexible optoelectronic devices is still hampered by the lack of an ITO-fre...
This article was supported by the German Research Foundation (DFG) and the Open Access Publication F...
This article was supported by the German Research Foundation (DFG) and the Open Access Publication F...
Indium-tin oxide (ITO) thin layers are obtained by an IBS (Ion Beam Sputtering) deposition process....
Indium-tin oxide (ITO) thin layers are obtained by an IBS (Ion Beam Sputtering) deposition process....
Indium-tin oxide (ITO) thin layers are obtained by an IBS (Ion Beam Sputtering) deposition process....
Transparent and conducting ITO/Ag/ITO (IAI) multilayer coatings were deposited on glass and flexible...
Transparent conductive ITO/Ag/ITO multilayer thin films were successfully deposited on polyethylene ...
International audienceIn this study, we presented high-performance flexible organic light-emitting d...
In this study polyethylene naphthalate(PEN) and polyethersulfone(PES) films were chosen as a flexibl...
International audienceIndium-tin oxide (ITO) thin layers are obtained by an IBS (Ion Beam Sputtering...
International audienceIndium-tin oxide (ITO) thin layers are obtained by an IBS (Ion Beam Sputtering...
The broad application of flexible optoelectronic devices is still hampered by the lack of an ITO fre...
The broad application of flexible optoelectronic devices is still hampered by the lack of an ITO fre...
The broad application of flexible optoelectronic devices is still hampered by the lack of an ITO fre...
The broad application of flexible optoelectronic devices is still hampered by the lack of an ITO-fre...
This article was supported by the German Research Foundation (DFG) and the Open Access Publication F...
This article was supported by the German Research Foundation (DFG) and the Open Access Publication F...
Indium-tin oxide (ITO) thin layers are obtained by an IBS (Ion Beam Sputtering) deposition process....
Indium-tin oxide (ITO) thin layers are obtained by an IBS (Ion Beam Sputtering) deposition process....
Indium-tin oxide (ITO) thin layers are obtained by an IBS (Ion Beam Sputtering) deposition process....
Transparent and conducting ITO/Ag/ITO (IAI) multilayer coatings were deposited on glass and flexible...