The medium and warm deformation behaviors of an indirect-extruded Mg-8Sn-1Al-1Zn alloy were investigated by compression tests at temperatures between 298 and 523 K and strain rates of 0.001-10 s(-1). It was found that the twinning-slip transition temperature was strain rate dependent, and all the true stress-true strain curves could be divided into two groups: concave and convex curves. Associated microstructural investigations indicated that the dynamic recrystallization (DRX) behavior of the alloy varied with deformation conditions. At high strain rate and low temperature, dynamically recrystallized grains preferentially nucleated and developed in the twinned regions, indicating that twinning-induced DRX was dominant. While, at low strain...
The thermal compression deformation behavior of homogenized Mg–5Zn–1Mn (wt.%) alloy was systematical...
Mg alloys have been extensively investigated because they are promising engineering materials with a...
Uniaxial compression tests were conducted on cast and extruded AZ80 alloys at 400Â °C and a strain r...
The plastic deformation behavior and dynamic recrystallization (DRX) in homogenized AZ31 Mg alloy wa...
To assess the effect of strain and strain rate on texture evolution of an extruded Mg–6Al–3Zn alloy,...
International audienceThe deformation behavior of an extruded Mg-8Gd-3Y-0.5Zr alloy has been charact...
The hot deformation behavior of Mg-8.7Gd-4.18Y-0.42Zr alloy was investigated by uniaxial hot compres...
© 2019 Elsevier B.V. Controlling the microstructure and texture of Mg-based alloys is of paramount ...
This study investigates the effects of extrusion temperature on the dynamic recrystallization (DRX) ...
To investigate the interrelation of dynamic recrystallization and detwinning behaviors, especially d...
480-486The uniaxial compression tests were carried out on AZ31 magnesium alloy samples at 150°C and ...
In this work, the deformation behaviour of an Mg-8Al-0.5Zn (AZ80) alloy having a fixed initial grain...
The microstructure evolution in Mg-8Gd-2Y-1Nd-0.3Zn-0.6Zr alloy subjected to hot compression at 350 ...
The influence of grain size on the deformation of extruded Mg-3Al-1Zn tested in tension at temperatu...
The twinning behavior and microstructural variations of extruded Mg alloy with a bimodal structure d...
The thermal compression deformation behavior of homogenized Mg–5Zn–1Mn (wt.%) alloy was systematical...
Mg alloys have been extensively investigated because they are promising engineering materials with a...
Uniaxial compression tests were conducted on cast and extruded AZ80 alloys at 400Â °C and a strain r...
The plastic deformation behavior and dynamic recrystallization (DRX) in homogenized AZ31 Mg alloy wa...
To assess the effect of strain and strain rate on texture evolution of an extruded Mg–6Al–3Zn alloy,...
International audienceThe deformation behavior of an extruded Mg-8Gd-3Y-0.5Zr alloy has been charact...
The hot deformation behavior of Mg-8.7Gd-4.18Y-0.42Zr alloy was investigated by uniaxial hot compres...
© 2019 Elsevier B.V. Controlling the microstructure and texture of Mg-based alloys is of paramount ...
This study investigates the effects of extrusion temperature on the dynamic recrystallization (DRX) ...
To investigate the interrelation of dynamic recrystallization and detwinning behaviors, especially d...
480-486The uniaxial compression tests were carried out on AZ31 magnesium alloy samples at 150°C and ...
In this work, the deformation behaviour of an Mg-8Al-0.5Zn (AZ80) alloy having a fixed initial grain...
The microstructure evolution in Mg-8Gd-2Y-1Nd-0.3Zn-0.6Zr alloy subjected to hot compression at 350 ...
The influence of grain size on the deformation of extruded Mg-3Al-1Zn tested in tension at temperatu...
The twinning behavior and microstructural variations of extruded Mg alloy with a bimodal structure d...
The thermal compression deformation behavior of homogenized Mg–5Zn–1Mn (wt.%) alloy was systematical...
Mg alloys have been extensively investigated because they are promising engineering materials with a...
Uniaxial compression tests were conducted on cast and extruded AZ80 alloys at 400Â °C and a strain r...