1874-2564/09 2009 Bentham Open Open Access Optimizing Jerky Drying Time with Minimal Product Impact

Abstract: Jerky products are a popular snack in today’s society. The process of making jerky products is very time con-suming –especially the dehydration process. If the process is sped up the producer will save time and money. This study focuses mainly on speeding up dehydration time with minimal potential impact on the final product. Beef jerky was our test product and was made from eye of round sliced to 5 mm, vacuum packaged and frozen to-10C. The product was marinated in a jerky seasoning for 1 hour. A two level factorial array experiment was designed to identify the optimum levels of four control factors that could affect dehydration time: pH, freeze/thaw, product orientation, and tenderization. Half of the packages were thawed at 5C and then refrozen to account for two levels of freeze-thaw cycles. The two pH levels were “unadjusted ” and “adjusted”. White vinegar was added to the marinade to adjust the pH to within 5 to 5.25. Half of the jerky samples were tenderized by adding 0.5 mg of a commercial liquid papain preparation to the marinade. The meat was pasteurized under a wet bulb temperature of 60C for 12 min and dried for 5 hours at 65C dry bulb. Treat-ments were repeated in triplicate. Tenderizer had the greatest effect on reducing the dehydration time, followed by ad-justed pH and vertical orientation. Dehydration times for all experiments averaged 258 min and ranged from 146 to 386 min. A response optimization model predicted (95 % confidence level) a dehydration time of 178 min