abstract: The overall objective of this project is to optimize the development of magnetic ferrite thin films targeted for enabling low-loss broadband communication devices, miniaturized low-microwave inductors and electromagnetic noise suppressors. The focus of this objective is to design and build a reactor and improve the spin-spray process. Each film is then characterized and optimized to have a high permeability and high frequency in the range of 500 MHz - 3 GHz. Films produced by the µ-droplet deposition regime yields a higher Snoek's product than the continuous liquid layer regime. The highest Snoek's product occurs when it is deposited at an oxidant pH of 8.28. The Ni-Zn-Co ferrite magnetic domains were imaged using the Lorentz TEM ...
Polylactic acid (PLA) is a biodegradable plastic that is relatively new compared to other plastics i...
The material and photovoltaic properties of a new class of conjugated polymers was investigated. The...
In drug discovery, it is important to use high throughput screening (HTS) technologies to rapidly id...
abstract: A series of Molybdenum-Copper bilayers were studied for use in 120mK superconducting trans...
In the present thesis, entitled “Strategies for the modulation of catalytic activity of Zn(II)-based...
The present thesis is focused on the preparation and characterization of hybrid nanosystems for poss...
Perovskite oxide materials provide a chemically diverse pseudo cubic ABO3 platform that possesses a ...
Enzymatic and thermochemical catalysis are both important industrial processes. However, the thermal...
Nitric oxide (NO) is involved in many important biological processes in humans, but the overproducti...
Elastomer-based microsystems hold great promise for a diverse range of applications such as rapid pr...
Organic photovoltaics (OPV) is a very promising technology, a dynamic and interdisciplinary resear...
Major obstacles to the use of NiAl-based alloys and composites are low ductility and toughness. Thes...
The U.S. Department of Energy (DOE) has been engaged in a viability study for a potential undergroun...
Various complementary NDT methods have been used for the characterization of oxide dispersion streng...
The development and investigation of a new affinity proteomics probe and methodology are presented i...
Polylactic acid (PLA) is a biodegradable plastic that is relatively new compared to other plastics i...
The material and photovoltaic properties of a new class of conjugated polymers was investigated. The...
In drug discovery, it is important to use high throughput screening (HTS) technologies to rapidly id...
abstract: A series of Molybdenum-Copper bilayers were studied for use in 120mK superconducting trans...
In the present thesis, entitled “Strategies for the modulation of catalytic activity of Zn(II)-based...
The present thesis is focused on the preparation and characterization of hybrid nanosystems for poss...
Perovskite oxide materials provide a chemically diverse pseudo cubic ABO3 platform that possesses a ...
Enzymatic and thermochemical catalysis are both important industrial processes. However, the thermal...
Nitric oxide (NO) is involved in many important biological processes in humans, but the overproducti...
Elastomer-based microsystems hold great promise for a diverse range of applications such as rapid pr...
Organic photovoltaics (OPV) is a very promising technology, a dynamic and interdisciplinary resear...
Major obstacles to the use of NiAl-based alloys and composites are low ductility and toughness. Thes...
The U.S. Department of Energy (DOE) has been engaged in a viability study for a potential undergroun...
Various complementary NDT methods have been used for the characterization of oxide dispersion streng...
The development and investigation of a new affinity proteomics probe and methodology are presented i...
Polylactic acid (PLA) is a biodegradable plastic that is relatively new compared to other plastics i...
The material and photovoltaic properties of a new class of conjugated polymers was investigated. The...
In drug discovery, it is important to use high throughput screening (HTS) technologies to rapidly id...