The pump with a diffuser with stochastic blades (runner and diffuser)

This doctoral thesis studies the non-uniform blade cascade for centrifugal pumps. Influence of non-uniform blade cascade is investigated on the impeller and diffuser. A non-uniform blading impeller of pumps in this doctoral thesis was examined in terms of influence on efficiency characteristic. The idea of using non-uniform blading is to obtain a flat efficiency characteristic. Then the centrifugal pump could be used on larger scale of power with achieving a sufficiently high efficiency. The work is based on experimental measurements and numerical simulations of non-uniform hydraulic pump components. Non-uniform impeller and the diffuser were newly designed for this research. A new measuring track of small submersible pumps was needed to design and build for measurements. Different pump combinations with conventional hydraulics on one working point and hydraulics with non-uniform were measured. All measurements were evaluated and characteristics of efficiency, head and power were obtained for each measured combination. Some of pump combinations (which were measured in experiment) were numerically simulated by program Ansys Fluent. Data needed to evaluate the characteristic of efficiency and specific energy were collected from each numerical simulation. A theoretical consideration concerns the influence of non-uniform blade cascade applied on diffuser. The suggestion how to decrease hydraulic losses in canals was done. The theoretical consideration how to make a flat efficiency characteristic was made