Family House with atelier

The aim of this bachelor thesis is to design and draft project documentation for the building works of a family house with an atelier in the cadastral area of Oleško. It is a three-storey detached house with its interior layout corresponding to the conditions of service. The family house is designed for a four-member family. The structure of the building is made of the system of POROTHERM with an outer insulation system of BAUMIT OPENTHERM with the thickness of 120 mm. Peripheral vertical supporting structures of the ground floor and the first floor will be lined with POROTHERM 30 P+D and the basement will be made from a permanent formwork of Prefa Brno BTB 40/30/24 (P+D). The interior bearing masonry walls are made of POROTHERM 24 P+D and non-bearing walls are made of POROTHERM 11.5 AKU. The exterior plastering in white colour is the water-resistant, thin-film grooved plaster of BAUMIT OPENTOP with the grains of 2 mm. The staircase is monolithic, of reinforced concrete. Horizontal bearing structures are made of ceramic-concrete system of POROTHERM with the thickness of 250 mm (Pot girders and Miako fillers). The roof is double-pitched with the roof tiling in black colour of TONDACH Jiřčanka 13. The wood doors and windows are designed in the colour of walnut; the garage has a section door also in the walnut colour. The flooring has been chosen according to the type of usage of each of the rooms, i.e. ceramic flooring, wooden floor, The main aim of my work was to design a layout for the particular purpose, i.e. a suitable solution of the structure and a draft of technical documentation with drawings, text part included. The bachelor work is processed in the form of project documentation for the realization of the building