Effects of mineral admixtures and lime on disintegration of alkali-activated slag exposed to 50 °c

Alkali-activated slag can totally disintegrate when exposed to 50 C. This paper presents a study of possible solutions to avoid this disintegration by using silica fume (SF) and fly ash (FA) to partially replaceslag. It was found that partial replacement of slag with SF significantly reduces strength loss. A mixture of 50% slag 50% SF (cured at 25 and 60 C) showed no strength loss after the exposure. In comparison, a55% drop of strength was observed in a mixture of 50% slag 50% FA (cured at 25 C) after the same exposure.However, the strength loss of this mixture was reduced by 50% when cured at 60 C. The presence oflime in AAS pastes increases the degree of strength loss after the exposure. The mechanisms for the abovestrength results are discussed in terms of hydration products and microcracking