Linear network coding and parallel transmission increase fault tolerance and optical reach

As optical networks evolve towards more dynamicity and an ever more efficient and elastic spectrum utilization, a more integrated, fault tolerant and system efficient design is becoming critical. To increase efficiency of spectral resource in bit rate per Hz (bit/s/Hz), high-level modulation formats are used, challenged by the accompanying optical impairments and the resulting limitation of optical reach. Previous work has addressed the issue of optical reach and transmission fault tolerance in the physical layer by deploying various FEC schemes and by a careful design of optical transceivers and links. This paper uses a different approach, applicable to link and networking layers. We propose a novel theoretical framework, whereby a randomized linear network coding (LNC) is applied to the main optical path, and in parallel, an auxiliary optical path is used at much lower transmission speeds, i.e., in addition to the main path. With the reception of the auxiliary path, as we analytically show, the system is highly tolerant to bit errors and packet loss caused by optical impairments in the main path, whereby alleviating the constraints on optical transmission quality and indirectly achieving better optical reach and spectral efficiency. The results are shown for a case study of high-speed Ethernet end-system transmitted over optical OFDM networks, which due to the inherent system-level parallelism in both networks, present one of the most interesting candidate technologies for the proposed method to yield best performance