Design of a CT bandpass delta-sigma modulator /

Thesis: S.M., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2014.Cataloged from PDF version of thesis.Includes bibliographical references (pages 103-105).An 8th-order continuous-time (CT) bandpass delta-sigma modulator has been designed and simulated in a 65 nm CMOS process. This modulator achieves in simulation 25 MHz signal bandwidth at 250 MHz center frequency with a signal-to- noise ratio (SNR) of 75.5 dB. The modulator samples at 1 GS/s while consuming 319 mW. On the system level, the feedback topology secures stability for the 8th-order system, achieving a maximum stable input range of -1.9 dBFS. A 2.5-V/1.2-V dual-supply loop filter with a feed-forward coupling path has been proposed to suppress noise and distortion. On the transistor level, a 5th -order dual-supply feed-forward operational amplifier (op amp) and a 4th-order single-supply feed-forward op amp have been designed to enable high modulator linearity and coefficient accuracy.by Xi Yang.S.M