Nitrate removal from water using alum and ferric chloride: A comparative study of alum and ferric chloride efficiency

Background: Nitrate is an acute and well-known hazardous contaminant, and its contamination of water sources has been a growing concern worldwide in recent years. This study evaluated the feasibility of nitrate removal from water using the traditional coagulants alum and ferric chloride with lower concentrations than those used in the conventional coagulation process. Methods: In this research, two coagulants, alum and ferric chloride, were compared for their efficiency in removing nitrate in a conventional water treatment system. The removal process was done in a batch system (jar test) to examine the effects of coagulant dosages and determine the conditions required to achieve optimum results. Results: The results revealed that ferric chloride at an initial dose rate of 4 mg/L reduced nitrate concentration from 70 mg/L to less than the World Health Organization (WHO) guideline value (50 mg/L N-NO3). However, the removal efficiency of alum was not salient to significant nitrate reduction. Conclusion: In conclusion, ferric chloride was more effective than alumin removing NO- 3, even in common dosage range, and can be considered a cost-effective and worthy treatment option to remediate nitratepolluted water. Furthermore, the removal of nitrate by coagulation can be simple and more economical than other treatment alternatives. Keywords: Nitrate, Water treatment, Coagulation, Alum, Ferric chloride Citation: Aghapour AA, Nemati S, Mohammadi A, Nourmoradi H, Karimzadeh S. Nitrate removal from water using alum and ferric chloride: a comparative study of alum and ferric chloride efficiency. Environmental Health Engineering and Management Journal 2016; 3(2): 69–73. doi: 10.15171/ ehemj.2016.03