Properties of Binderless Particleboard Made from Branches Waste of Several Community Forest Species

SIFAT PAPAN PARTIKEL DARI LIMBAH EKSPLOITASI

Rozak Memed
I M Sulastiningsih

August 2017

The result of a study on the properties of particle board made from logging waste is reported in thi...

Particleboard from plantation species of Neolamarckia Cadamba Sp.(Kelempayan) and Endospermum Diadenum Sp. (Sesenduk)

Sadam Kahar,

January 2018

The objectives of this study were to evaluate the mechanical and physical properties of particleboar...

USE OF RESIDUES OF FORESTRY EXPLORATION OF Pinus taeda FOR PARTICLEBOARD MANUFACTURE

Iwakiri,Setsuo
Trianoski,Rosilani
Chies,Daniel
Tavares,Everton Lorenzett
França,Morgana Cristina
Lau,Pamela Caroline
Iwakiri,Viviane Teixeira

January 2017

ABSTRACT This study aimed to evaluate the quality of particleboards manufactured with forest exploit...

This research objective was to evaluate the physical and mechanical properties of particleboard made from logging residue from plantation forest, namely akasia (Acacia mangium) and ekaliptus (Eucalyptus sp). Type particle was sawdust and bonded with Urea Formaldehyde (UF)-Isocyanate mix resin with ratio 100:15. Control resin (UF) was also prepared for comparison with resin solid content 52.7%. The target thickness of particleboard was 1 cm, pressed at 25 kg/ cm2 for 15 minutes at 140 °C. Level of resin was 7% based on oven dry particle weight. The boards were evaluated based on JIS A 5908-2003. The results showed:1) Utilization of UF-isocyanate mix resin improved the moisture content, thickness swelling, and water absorption of particleboard 2) The best particleboard from physical and mechanical properties point of view was particleboard made of akasia bonded with UF-isocyanate mix resin Keywords : Physical and mechanical properties, logging residue, particleboard

NURYAWAN, Arif
RISNASARI, Iwan
SINAGA, Pamona Silvia

April 2012

This research objective was to evaluate the physical and mechanical properties of particleboard made...

Characteristics of Several Wood from Community Forest as Potential Application for Raw Material for Composite Board

Yunianti, A.D.
Suhasman
Saad, S.

September 2014

Four species of fast growing species are potential forest product from community forest. The four sp...

The purpose of this study was to analyze the phisycal and mechanical properties of binderless particleboard using bamboo as raw materials. Andong bamboo (Gigantochloa pseudoarundinaceae) used in this study was taken from Bogor area. Bamboo was converted using hammer mill and air dried subsequently. The particle zise was passed of the 20 mesh screener. Three types pretreatment were used to prepare the particle, namely : 1) water boiling for 30 and 60 minutes, 2) oxydation using hydrogen peroxyde, and 3) combination of water boiling for 30 minutes and oxydation using hydrogen proxide. As a control, conventional particleboards using 10 % melamine formaldehyde (MF) resin based on dry particle weight was produced. The particle which has pretreated then utilized to produce binderless particleboard with board density of 0.75 g/cm3. The pressing conditions were 180 oC in temperature, 25 kgf/cm2 in pressure for 20 minutes. The board characteristics were tested according to JIS A 5908 2003. The results indicated that particleboard made from particle with oxydation pretreatment performed superior characteristics compared to those of particleboard made from particle only with water boiling pretreatment. Dimensional stability and modulus of elasticity of board with oxydation pretreatment were excellent. Its was superior compared to that of conventional particleboard using melamine formaldehyde as adhesive. Keywords : Bamboo, Binderless Particleboard, Oxydation, Hydrogen Peroxyde

., SUHASMAN
MASSIJAYA, Muh. Yusram
HADI, Yusuf Sudo
SANTOSO, Adi

April 2012

The purpose of this study was to analyze the phisycal and mechanical properties of binderless partic...

Prospects for the use of municipal tree pruning wastes in particleboard production

Duarte Da Silva, Manuel Joaquim
Bezerra, Barbara Stolte
Gomes Battistelle, Rosane Aparecida
De Domenico Valarelli, Ivaldo

September 2013

The purpose of this study was to evaluate the physical and mechanical properties of particleboard ma...

Reaction Wood Characteristics of Pulai (Alstonia spp) and Lento-lento (Arthrophyllum diversifolium) : As raw materials for particle boards

Yunianti, Andi Detti
Suhasman
Saad, Sahriyanti
Pari, G.

September 2013

Scope of the research on the basic properties of reaction wood from fast growing species in the fore...

The Potential of Using Forest Waste as a Raw Material in Particleboard Manufacturing

Sahin, Halil Ibrahim

January 2020

Wood particles and a mixture of forest waste were investigated as raw material for the particleboard...

PARTICLEBOARD PRODUCTION WITH RESIDUES FROM MECHANICAL PROCESSING OF AMAZONIAN WOODS

Paula Gabriella Surdi (6137006)
Geraldo Bortoletto Júnior (6720992)
Vinicius Resende de Castro (6137012)
Flávia Maria Silva Brito (6146909)
Matheus da Silva Berger (6720995)
José Cola Zanuncio (360866)

May 2019

ABSTRACT The lack of use of the residues generated by the mechanical processing of wood and their in...

Properties of particleboard produced from admixture of rubberwood and Mahang species

Loh, Yang Way
H'ng, Paik San
Lee, Seng Hua
Lum, Wei Chen
Tan, Chun Knee

January 2010

Particleboard is one of the major timber products exported from Peninsular Malaysia. Apparently, the...

Physical and mechanical properties of jabon wood particleboards were studied. The wood particle from lower, upper parts of trunk and branches of jabon tree were used. The wood wettability was observed at lower, upper part of trunk and branches of 2.5 years old jabon tree from Cihideung Ilir village, Bogor. The quality of particleboard in terms of density, moisture content, thickness swelling, modulus of elasticity, modulus of rupture, internal bond, and screw holding power were tested accordance with JIS 5908:2003. In general partikel bord made of jabon wood from upper, lower of trunk and branches of jabon were as follow: density (0.61 g/cm³, 0.58 g/cm³, 0.65 g/cm³), moisture content (9.9%, 9.7%, 9.3%), thickness swelling (44.8%; 52.3%; 30.6%), modulus of elasticity (9716.1 kg/cm², 7997.4 kg/cm², 12954.3 kg/cm²), modulus of rupture (82.6 kg/cm², 71.3 kg/cm², 90.8 kg/cm²), internal bond (5.06 kg/cm², 3.02 kg/cm², 6.12 kg/cm²) and screw holding power (30.6 kg/cm², 38.8 kg/cm², 47.5 kg/cm²), respectively. The quality of jabon wood were not affected by the precentage of adhesive used. There were a variability in wettability of jabon wood between parts of tree. The wettability of jabon wood of upper, lower trunk and branches were 1800.4, 2126.1 and 2169.7 mm, respectively. Furthermore, the variabilities were also happened in almost all physical dan mechanical properties of the particleboard. The higher the wettability the higher the quality of the particleboard, means that wettability as a good indicator for quality of jabon woods particleboard.The quality of particleboard made of woods from branches were better than others. Keywords: particleboard, jabon, wettability,gluability

RUHENDI, Surdiding
PUTRA, Erwinsyah

April 2012

Physical and mechanical properties of jabon wood particleboards were studied. The wood particle from...

Sifat Papan Partikel dari Limbah Eksploitasi

Memed, R. (Rozak)
Sulastiningsih, I. M. (I)

January 1986

The result of a study on the properties of particle board made from logging waste is reported in thi...

Hybrid particleboard made from bamboo (Dendrocalamus asper) veneer waste and rubberwood (Hevea brasilienses)

Othman, Nurhazwani
Jawaid, Mohammad
Md. Tahir, Paridah
Abdul Halip, Juliana
Saleh, Abdul Hamid

January 2016

This study investigated adhesion properties, such as buffering capacity and wettability, of bamboo a...

The selected properties of hybrid particleboard made from oil palm empty fruit bunch (EFB) and merpauh (Irvingla Malayanan Olive) sawdust wastes

Hamid, Norul Hisham
Yazid, Mohd Fitri
Hassan, Noraishah
Mokhtar, Mohd Afiq

August 2015

The physical and mechanical properties of particleboard made from Merpauh (Irvingla malayana olive) ...

SIFAT PAPAN PARTIKEL DARI LIMBAH EKSPLOITASI

Rozak Memed
I M Sulastiningsih

August 2017

The result of a study on the properties of particle board made from logging waste is reported in thi...

Particleboard from plantation species of Neolamarckia Cadamba Sp.(Kelempayan) and Endospermum Diadenum Sp. (Sesenduk)

Sadam Kahar,

January 2018

The objectives of this study were to evaluate the mechanical and physical properties of particleboar...

USE OF RESIDUES OF FORESTRY EXPLORATION OF Pinus taeda FOR PARTICLEBOARD MANUFACTURE

Iwakiri,Setsuo
Trianoski,Rosilani
Chies,Daniel
Tavares,Everton Lorenzett
França,Morgana Cristina
Lau,Pamela Caroline
Iwakiri,Viviane Teixeira

January 2017

ABSTRACT This study aimed to evaluate the quality of particleboards manufactured with forest exploit...

This research objective was to evaluate the physical and mechanical properties of particleboard made from logging residue from plantation forest, namely akasia (Acacia mangium) and ekaliptus (Eucalyptus sp). Type particle was sawdust and bonded with Urea Formaldehyde (UF)-Isocyanate mix resin with ratio 100:15. Control resin (UF) was also prepared for comparison with resin solid content 52.7%. The target thickness of particleboard was 1 cm, pressed at 25 kg/ cm2 for 15 minutes at 140 °C. Level of resin was 7% based on oven dry particle weight. The boards were evaluated based on JIS A 5908-2003. The results showed:1) Utilization of UF-isocyanate mix resin improved the moisture content, thickness swelling, and water absorption of particleboard 2) The best particleboard from physical and mechanical properties point of view was particleboard made of akasia bonded with UF-isocyanate mix resin Keywords : Physical and mechanical properties, logging residue, particleboard

NURYAWAN, Arif
RISNASARI, Iwan
SINAGA, Pamona Silvia

April 2012

This research objective was to evaluate the physical and mechanical properties of particleboard made...

Characteristics of Several Wood from Community Forest as Potential Application for Raw Material for Composite Board

Yunianti, A.D.
Suhasman
Saad, S.

September 2014

Four species of fast growing species are potential forest product from community forest. The four sp...

The purpose of this study was to analyze the phisycal and mechanical properties of binderless particleboard using bamboo as raw materials. Andong bamboo (Gigantochloa pseudoarundinaceae) used in this study was taken from Bogor area. Bamboo was converted using hammer mill and air dried subsequently. The particle zise was passed of the 20 mesh screener. Three types pretreatment were used to prepare the particle, namely : 1) water boiling for 30 and 60 minutes, 2) oxydation using hydrogen peroxyde, and 3) combination of water boiling for 30 minutes and oxydation using hydrogen proxide. As a control, conventional particleboards using 10 % melamine formaldehyde (MF) resin based on dry particle weight was produced. The particle which has pretreated then utilized to produce binderless particleboard with board density of 0.75 g/cm3. The pressing conditions were 180 oC in temperature, 25 kgf/cm2 in pressure for 20 minutes. The board characteristics were tested according to JIS A 5908 2003. The results indicated that particleboard made from particle with oxydation pretreatment performed superior characteristics compared to those of particleboard made from particle only with water boiling pretreatment. Dimensional stability and modulus of elasticity of board with oxydation pretreatment were excellent. Its was superior compared to that of conventional particleboard using melamine formaldehyde as adhesive. Keywords : Bamboo, Binderless Particleboard, Oxydation, Hydrogen Peroxyde

., SUHASMAN
MASSIJAYA, Muh. Yusram
HADI, Yusuf Sudo
SANTOSO, Adi

April 2012

The purpose of this study was to analyze the phisycal and mechanical properties of binderless partic...

Prospects for the use of municipal tree pruning wastes in particleboard production

Duarte Da Silva, Manuel Joaquim
Bezerra, Barbara Stolte
Gomes Battistelle, Rosane Aparecida
De Domenico Valarelli, Ivaldo

September 2013

The purpose of this study was to evaluate the physical and mechanical properties of particleboard ma...

Reaction Wood Characteristics of Pulai (Alstonia spp) and Lento-lento (Arthrophyllum diversifolium) : As raw materials for particle boards

Yunianti, Andi Detti
Suhasman
Saad, Sahriyanti
Pari, G.

September 2013

Scope of the research on the basic properties of reaction wood from fast growing species in the fore...

The Potential of Using Forest Waste as a Raw Material in Particleboard Manufacturing

Sahin, Halil Ibrahim

January 2020

Wood particles and a mixture of forest waste were investigated as raw material for the particleboard...

PARTICLEBOARD PRODUCTION WITH RESIDUES FROM MECHANICAL PROCESSING OF AMAZONIAN WOODS

Paula Gabriella Surdi (6137006)
Geraldo Bortoletto Júnior (6720992)
Vinicius Resende de Castro (6137012)
Flávia Maria Silva Brito (6146909)
Matheus da Silva Berger (6720995)
José Cola Zanuncio (360866)

May 2019

ABSTRACT The lack of use of the residues generated by the mechanical processing of wood and their in...

Properties of particleboard produced from admixture of rubberwood and Mahang species

Loh, Yang Way
H'ng, Paik San
Lee, Seng Hua
Lum, Wei Chen
Tan, Chun Knee

January 2010

Particleboard is one of the major timber products exported from Peninsular Malaysia. Apparently, the...

Physical and mechanical properties of jabon wood particleboards were studied. The wood particle from lower, upper parts of trunk and branches of jabon tree were used. The wood wettability was observed at lower, upper part of trunk and branches of 2.5 years old jabon tree from Cihideung Ilir village, Bogor. The quality of particleboard in terms of density, moisture content, thickness swelling, modulus of elasticity, modulus of rupture, internal bond, and screw holding power were tested accordance with JIS 5908:2003. In general partikel bord made of jabon wood from upper, lower of trunk and branches of jabon were as follow: density (0.61 g/cm³, 0.58 g/cm³, 0.65 g/cm³), moisture content (9.9%, 9.7%, 9.3%), thickness swelling (44.8%; 52.3%; 30.6%), modulus of elasticity (9716.1 kg/cm², 7997.4 kg/cm², 12954.3 kg/cm²), modulus of rupture (82.6 kg/cm², 71.3 kg/cm², 90.8 kg/cm²), internal bond (5.06 kg/cm², 3.02 kg/cm², 6.12 kg/cm²) and screw holding power (30.6 kg/cm², 38.8 kg/cm², 47.5 kg/cm²), respectively. The quality of jabon wood were not affected by the precentage of adhesive used. There were a variability in wettability of jabon wood between parts of tree. The wettability of jabon wood of upper, lower trunk and branches were 1800.4, 2126.1 and 2169.7 mm, respectively. Furthermore, the variabilities were also happened in almost all physical dan mechanical properties of the particleboard. The higher the wettability the higher the quality of the particleboard, means that wettability as a good indicator for quality of jabon woods particleboard.The quality of particleboard made of woods from branches were better than others. Keywords: particleboard, jabon, wettability,gluability

RUHENDI, Surdiding
PUTRA, Erwinsyah

April 2012

Physical and mechanical properties of jabon wood particleboards were studied. The wood particle from...

Sifat Papan Partikel dari Limbah Eksploitasi

Memed, R. (Rozak)
Sulastiningsih, I. M. (I)

January 1986

The result of a study on the properties of particle board made from logging waste is reported in thi...

Hybrid particleboard made from bamboo (Dendrocalamus asper) veneer waste and rubberwood (Hevea brasilienses)

Othman, Nurhazwani
Jawaid, Mohammad
Md. Tahir, Paridah
Abdul Halip, Juliana
Saleh, Abdul Hamid

January 2016

This study investigated adhesion properties, such as buffering capacity and wettability, of bamboo a...

The selected properties of hybrid particleboard made from oil palm empty fruit bunch (EFB) and merpauh (Irvingla Malayanan Olive) sawdust wastes

Hamid, Norul Hisham
Yazid, Mohd Fitri
Hassan, Noraishah
Mokhtar, Mohd Afiq

August 2015

The physical and mechanical properties of particleboard made from Merpauh (Irvingla malayana olive) ...

SIFAT PAPAN PARTIKEL DARI LIMBAH EKSPLOITASI

Rozak Memed
I M Sulastiningsih

August 2017

The result of a study on the properties of particle board made from logging waste is reported in thi...

Particleboard from plantation species of Neolamarckia Cadamba Sp.(Kelempayan) and Endospermum Diadenum Sp. (Sesenduk)

Sadam Kahar,

January 2018

The objectives of this study were to evaluate the mechanical and physical properties of particleboar...

USE OF RESIDUES OF FORESTRY EXPLORATION OF Pinus taeda FOR PARTICLEBOARD MANUFACTURE

Iwakiri,Setsuo
Trianoski,Rosilani
Chies,Daniel
Tavares,Everton Lorenzett
França,Morgana Cristina
Lau,Pamela Caroline
Iwakiri,Viviane Teixeira

January 2017

ABSTRACT This study aimed to evaluate the quality of particleboards manufactured with forest exploit...

Properties of Binderless Particleboard Made from Branches Waste of Several Community Forest Species

Abstract

Extracted data

Properties of Binderless Particleboard Made from Branches Waste of Several Community Forest Species

Abstract

Extracted data

Related items

Related items