The frequency response of dynamic friction: Enhanced rate-and-state models

The prediction and control of friction-induced vibration requires a sufficiently accurate constitutive law for dynamic friction at the sliding interface: for linearised stability analysis, this requirement takes the form of a frictional frequency response function. Systematic measurements of this frictional frequency response function are presented for small samples of nylon and polycarbonate sliding against a glass disc. Previous efforts to explain such measurements from a theoretical model have failed, but an enhanced rate-and-state model is presented which is shown to match the measurements remarkably well. The tested parameter space covers a range of normal forces (10–50 N), of sliding speeds (1–10 mm/s) and frequencies (100–2000 Hz). The key new ingredient in the model is the inclusion of contact stiffness to take into account elastic deformations near the interface. A systematic methodology is presented to discriminate among possible variants of the model, and then to identify the model parameter values.Alessandro Cabboi and Thibaut Putelat both acknowledge support from the EPSRC programme grant “Engineering Nonlinearity” (ref. EP/K003836/1).This is the final version of the article. It first appeared from Elsevier via https://doi.org10.1016/j.jmps.2016.03.02