We report a new value for the universal gas constant R:8.3144710.000014 J mol-1 K-1. The standard error of R has been reduced by a factor of 5, to 1.7 ppm. R was determined from the speed of sound in argon contained within a thick, spherical shell at the temperature of the triple point of water Tt. The volume of the shell was measured by our weighing the mercury required to fill it at Tt. The molar mass of the argon was determined relative to that of a standard with accurately known chemical and isotopic composition by use of speed-of-sound data
We report on two sets of isothermal acoustic measurements made with argon close to the triple point ...
International audienceWe used absolute primary acoustic gas thermometry (AGT) to calibrate a Pt–Co r...
We used absolute primary acoustic gas thermometry (AGT) to calibrate a Pt-Co resistance thermometer ...
We report a new determination of the Universal Gas Constant R: (8.314 471 ±0.000 014) J·mol−1K−1. Th...
We have determined the acoustic and microwave frequencies of a misaligned spherical resonator maint...
±0.OOOOI4)J.mol- 1K- 1 • The uncer-tainty in the new value is 1.7 ppm (stan-dard error), a factor of...
Producción CientíficaA new determination of the molar gas constant was performed from measurements o...
The speed of sound in various gases was measured using two different acoustic resonators. The first...
We review the progress in acoustic metrology of gases that has occurred since the 1988 measurement o...
Since 2005, there is an important interest in the international metrology community fornew accurate ...
Thermophysical properties of hydrogen are needed to design equipments associated with hydrogen. The ...
The speed of sound in a number of gases has been measured. Values were obtained from measurements o...
© The Author(s) 2011. This article is published with open access at Springerlink.com Abstract There ...
We have measured the differences between the Kelvin thermodynamic temperature and the temperature o...
A collaborative project between IEN and IMGC is being developed with the aim to compare the thermody...
We report on two sets of isothermal acoustic measurements made with argon close to the triple point ...
International audienceWe used absolute primary acoustic gas thermometry (AGT) to calibrate a Pt–Co r...
We used absolute primary acoustic gas thermometry (AGT) to calibrate a Pt-Co resistance thermometer ...
We report a new determination of the Universal Gas Constant R: (8.314 471 ±0.000 014) J·mol−1K−1. Th...
We have determined the acoustic and microwave frequencies of a misaligned spherical resonator maint...
±0.OOOOI4)J.mol- 1K- 1 • The uncer-tainty in the new value is 1.7 ppm (stan-dard error), a factor of...
Producción CientíficaA new determination of the molar gas constant was performed from measurements o...
The speed of sound in various gases was measured using two different acoustic resonators. The first...
We review the progress in acoustic metrology of gases that has occurred since the 1988 measurement o...
Since 2005, there is an important interest in the international metrology community fornew accurate ...
Thermophysical properties of hydrogen are needed to design equipments associated with hydrogen. The ...
The speed of sound in a number of gases has been measured. Values were obtained from measurements o...
© The Author(s) 2011. This article is published with open access at Springerlink.com Abstract There ...
We have measured the differences between the Kelvin thermodynamic temperature and the temperature o...
A collaborative project between IEN and IMGC is being developed with the aim to compare the thermody...
We report on two sets of isothermal acoustic measurements made with argon close to the triple point ...
International audienceWe used absolute primary acoustic gas thermometry (AGT) to calibrate a Pt–Co r...
We used absolute primary acoustic gas thermometry (AGT) to calibrate a Pt-Co resistance thermometer ...