Different silicon feedstock materials, Single Crystalline Crushed (SCS), Fluidized-Bed-Reactor (FBR) and Siemens (SIE) feedstock, were used as seeding layer for growing cylindrical shaped, high performance multi-crystalline ingots with a weight of 1.2 kg. Within the investigations a systematic variation of the particle size of the seeding material in the range of <1 mm up to 15 mm was performed. Grain size, grain orientation, and grain boundary type were evaluated at different ingot heights. These results show clearly, that the microstructure size, respectively the particle size for the crushed single crystalline material, determines the resulting grain structure in the ingot near the seeding position. If the microstructure size is equal to...
In this work the dislocation formation in the seed crystal induced by feedstock indentation during t...
The use of seed plates during directional solidification (DS) of Quasimono silicon ingots causes add...
International audienceDirectional solidification of a cast mono-seed and of a FZ-seed was performed ...
High performance multi-crystalline silicon (HPM-Si) for the use in photovoltaics is characterized by...
The grain structure of high-performance (HP) multicrystalline silicon (mc-Si) is characterized by a ...
This work targets multiple approaches for controlling the initial growth conditions of directional s...
High Performance multicrystalline silicon ingots are mostly produced with seeded growth on small siz...
Wafers from three heights and two different lateral positions (corner and centre) of four industrial...
Two silicon ingots with different seed plate configurations were crystallized by directional solidif...
International audienceIn High Performance Multi-Crystalline-Silicon (HPMC-Si) ingots, small seed gra...
International audienceIn order to estimate the quality of the crystallisation process of multi-cryst...
Multicrystalline silicon suitable for high efficient n-type solar cells has been developed by direct...
Multicrystalline silicon has a share of approximately 50% in photovoltaic energy conversion. The mul...
This work presents the results of a systematic study of mono- and poly-crystalline grain growth in d...
We investigated the relationship between the formation of small grains and distribution of precipita...
In this work the dislocation formation in the seed crystal induced by feedstock indentation during t...
The use of seed plates during directional solidification (DS) of Quasimono silicon ingots causes add...
International audienceDirectional solidification of a cast mono-seed and of a FZ-seed was performed ...
High performance multi-crystalline silicon (HPM-Si) for the use in photovoltaics is characterized by...
The grain structure of high-performance (HP) multicrystalline silicon (mc-Si) is characterized by a ...
This work targets multiple approaches for controlling the initial growth conditions of directional s...
High Performance multicrystalline silicon ingots are mostly produced with seeded growth on small siz...
Wafers from three heights and two different lateral positions (corner and centre) of four industrial...
Two silicon ingots with different seed plate configurations were crystallized by directional solidif...
International audienceIn High Performance Multi-Crystalline-Silicon (HPMC-Si) ingots, small seed gra...
International audienceIn order to estimate the quality of the crystallisation process of multi-cryst...
Multicrystalline silicon suitable for high efficient n-type solar cells has been developed by direct...
Multicrystalline silicon has a share of approximately 50% in photovoltaic energy conversion. The mul...
This work presents the results of a systematic study of mono- and poly-crystalline grain growth in d...
We investigated the relationship between the formation of small grains and distribution of precipita...
In this work the dislocation formation in the seed crystal induced by feedstock indentation during t...
The use of seed plates during directional solidification (DS) of Quasimono silicon ingots causes add...
International audienceDirectional solidification of a cast mono-seed and of a FZ-seed was performed ...