Detection of small-scale folds at a solar wind reconnection exhaust

Observations of reconnection in the solar wind over the last few years appear to indicate that the majority of large-scale reconnecting current sheets are roughly planar, and that reconnection itself is quasi-steady. Most studies of solar wind exhausts have used spacecraft with large separations and relatively low time cadence ion measurements. Here we present multipoint Cluster observations of a reconnection exhaust and the associated current sheet at ACE and Wind, enabling it to be studied on multiple length scales and at high time resolution. While analysis shows that on large scales the current sheet is planar, detailed measurements using the four closely spaced Cluster spacecraft show that the trailing edge of the reconnection jet is nonplanar with folds orthogonal to the reconnection plane, with length scales of approximately 230 ion inertial lengths. Our findings thus suggest that while solar wind current sheets undergoing reconnection may be planar on large scales, they may also exhibit complex smaller-scale structure. Such structure is difficult to observe and has rarely been detected because exhausts are rapidly convected past the spacecraft in a single cut; there is therefore a limited set of spacecraft trajectories through the exhaust which would allow the nonplanar features to be intercepted. We consider how such nonplanar reconnection current sheets can form and the processes which may have generated the 3-D structure that was observed