Solid solutions of CeO2 with Yb2O3, Y2O3, Sm2O3, Gd2O3, La2O3, Nb2O5, Ta2O5, and Pr6O11 were prepared by sol-gel methods. All of the samples exhibited a single, cubic phase in x-ray diffraction and the lattice parameters were consistent with formation of the solid solutions. Surprisingly, all of the mixed oxides exhibited a much lower catalytic activity for n-butane oxidation than that of pure CeO2 at 650 K, with Sm0.2Ce0.8O1.9, Gd0.2Ce0.8O1.9, La0.2Ce0.8O1.9, Nb0.1Ce0.9O2.05, and Ta0.1Ce0.9O2.05 showing rates less than 10-2 that of pure ceria. Lower dopant levels with Sm+3 and Gd+3 affected the rates proportionately less. The implications of these results for use of ceria as an oxidation catalyst are discussed
The effect of Ce/Pr ratio on ceria-praseodymia on structural and surface properties is studied. The ...
The thermodynamic redox properties for a series of ceria–zirconia solid solutions have been measured...
Ceria-titania solutions with compositions of Ce0.9Ti0.1O2 and Ce0.8Ti0.2O2 were prepared by the citr...
Solid solutions of CeO2 with Yb2O3, Y2O3, Sm2O3, Gd2O3, La2O3, Nb2O5, Ta2O5, and Pr6O11 were prepare...
The oxidation of methane, ethane, propane, and n-butane has been studied over CeO2 and Ce0.8Sm0.2Ox ...
Cerium–manganese mixed oxides with compositions of Ce0.5Mn0.5O1.75 and Ce0.8Mn0.2O1.9 were prepared ...
This thesis aims at providing a better understanding of ceria-based materials for catalytic applicat...
The thermodynamic properties of surface ceria were investigated through equilibrium isotherms determ...
The thermodynamic properties of surface ceria were investigated through equilibrium isotherms determ...
The ability of cerium to cycle between Ce+3 and Ce+4 is crucial for ceria-based materials in many ca...
Summarization: Ceria-based materials have received considerable attention in catalysis field due to ...
The activity of several lanthanide promoted Ceria in CO oxidation was studied. Samples were obtained...
The ability of cerium to cycle between Ce+3 and Ce+4 is crucial for ceria-based materials in many ca...
Ceria–terbia solid solution nanobelts were prepared by an electrochemical route and tested as cataly...
CeO2 and Ce–Zr mixed oxides with different Ce:Zr ratios were prepared; characterised by Raman spect...
The effect of Ce/Pr ratio on ceria-praseodymia on structural and surface properties is studied. The ...
The thermodynamic redox properties for a series of ceria–zirconia solid solutions have been measured...
Ceria-titania solutions with compositions of Ce0.9Ti0.1O2 and Ce0.8Ti0.2O2 were prepared by the citr...
Solid solutions of CeO2 with Yb2O3, Y2O3, Sm2O3, Gd2O3, La2O3, Nb2O5, Ta2O5, and Pr6O11 were prepare...
The oxidation of methane, ethane, propane, and n-butane has been studied over CeO2 and Ce0.8Sm0.2Ox ...
Cerium–manganese mixed oxides with compositions of Ce0.5Mn0.5O1.75 and Ce0.8Mn0.2O1.9 were prepared ...
This thesis aims at providing a better understanding of ceria-based materials for catalytic applicat...
The thermodynamic properties of surface ceria were investigated through equilibrium isotherms determ...
The thermodynamic properties of surface ceria were investigated through equilibrium isotherms determ...
The ability of cerium to cycle between Ce+3 and Ce+4 is crucial for ceria-based materials in many ca...
Summarization: Ceria-based materials have received considerable attention in catalysis field due to ...
The activity of several lanthanide promoted Ceria in CO oxidation was studied. Samples were obtained...
The ability of cerium to cycle between Ce+3 and Ce+4 is crucial for ceria-based materials in many ca...
Ceria–terbia solid solution nanobelts were prepared by an electrochemical route and tested as cataly...
CeO2 and Ce–Zr mixed oxides with different Ce:Zr ratios were prepared; characterised by Raman spect...
The effect of Ce/Pr ratio on ceria-praseodymia on structural and surface properties is studied. The ...
The thermodynamic redox properties for a series of ceria–zirconia solid solutions have been measured...
Ceria-titania solutions with compositions of Ce0.9Ti0.1O2 and Ce0.8Ti0.2O2 were prepared by the citr...