Experimental bond behaviour of GFRP and masonry bricks under impulsive loading

Fibre Reinforced Polymers have become a popular material for strengthening of masonry structures. The performance of this technique is strongly dependent on the bond between the FRP and the substrate. Understanding the strain rate effect on these materials and strengthening techniques is important for proper design and proper modelling of these systems under impacts or blast loads. This work aims to study the behaviour of the bond between GFRP and brick at different strain rates. A Drop Weight Impact Machine specially developed for pull-off tests (single shear tests) is used with different masses and different heights introducing different deformation rates. The strain rate effect on the failure mode, shear capacity and effective bond length is determined from the experimental results. Empirical relations of dynamic increase factors (DIF) for these materials and techniques are also presented.This work was performed under Project CH-SECURE (PTDC/EMC/120118/2010) funded by the Portuguese Foundation of Science and Technology – FCT. The authors acknowledge the support. The first author also acknowledges the support from his PhD FCT grant with the reference SFRH/BD/45436/2008