Influence of the process parameters on hollow fiber-forward osmosis membrane performances

© 2014 Balaban Desalination Publications. All rights reserved. Continued efforts are made in improving the performance of the low-cost forward osmosis (FO) membrane process which utilizes naturally available osmotic pressure of the draw solution (DS) as the driving force. Selection of a suitable DS and development of a better performing membrane remained the main research focus. In this study, the performance of a hollow fiber forward osmosis (HFFO) membrane was evaluated with respect to various operating conditions such as different cross-flow directions, membrane orientation, solution properties, and solution flow rates (Reynolds number). The study observed that operating parameters significantly affect the performance of the FO process. FO comparatively showed better performance at counter-current orientation. NaCl, KCl, and NH4Cl were evaluated as DS carrying common anion. Properties of the anionic part of the DS were found important for flux outcome, whereas reverse solute flux (RSF) was largely influenced by the properties of DS cationic part. FO was operated at different DS and feed solution (FS) flow rates and FO outcome was assessed for varying DS and FS Reynolds number ratio. FO showed better flux outcome as Re ratio for DS and FS decreases and vice versa. Results indicated that by adjusting FO processes conditions, HFFO membrane could achieve significantly lower specific RSF and higher water flux outcome. It was observed that using 2 M NaCl as DS and deionized water as FS, HFFO successfully delivered flux of 62.9 LMH which is significantly high compared to many FO membranes reported in the literature under the active layer-DS membrane orientation mode