Construction of a non-enzymatic glucose sensor based on copper nanoparticles/poly(o-phenylenediamine) nanocomposites

© 2014, Springer-Verlag Berlin Heidelberg. An electrochemical non-enzymatic glucose sensor was fabricated by electrodeposition of copper nanoparticles (CuNPs) onto a poly(o-phenylenediamine) (PoPD) film-modified glassy carbon electrode (CuNPs/PoPD/GCE). We had studied some factors such as the pH value of supporting electrolyte, the amount of PoPD and applied potentials and optimize the experiment conditions. Under the optimum conditions, the as-obtained sensor for glucose sensing had achieved a wide linear range, low detection limit, and fast response time. The current response of the as-obtained sensor towards electrochemical oxidation of glucose was linear with the concentration of glucose in the range of 5.0 μM to 1.6 mM (R = 0.998) in the solution of 0.1 M NaOH at the applied potential of 0.5 V. The detection limit is 0.25 μM and the fast response achieves within 1 s. The sensor exhibits good sensitivity, selectivity, and reproducibility. The proposed non-enzymatic glucose was successfully employed to determine glucose in blood samples