Influence of microstructure [alpha + beta and beta] on very high cycle fatigue behaviour of Ti-6Al-4V alloy

Titanium alloys are increasingly used for structural applications in transportation engineering (aerospace, automotive, railway, marine industry) because of their interesting properties (high mechanical properties to weight ratios, excellent corrosion resistance). In the present research work, the very high cycle fatigue behaviour of Ti–6Al–4V alloy of both bimodal and basketweave microstructures were investigated and compared. Fatigue tests at a very high number of cycles with R = −1 were carried out on titanium alloy - grade 5 specimens, cut from a forged flange used on a commercial aircraft. The experimental tests showed that this alloy has an always decreasing S-N curve, even for a number of cycles greater than 109. It is the typical behavior of some alloys used in the aircraft industry, such as aluminum, titanium, nickel and high-strength steels. Moreover the very high cycle fatigue tests demonstrated that the Ti–6Al–4V alloy with bimodal microstructure has fatigue strength higher than the Ti–6Al–4V alloy with basketweave microstructure. The effect of microstructure on fatigue mechanism focused on internal crack initiation has been discussed through SEM observation of sub-cracks underneath the fracture surface. The temperature evolution during the tests was detected by means of IR cameras to study the temperature effect on the material response