The influence of temperature and the effect of aggressive anions on the electrochemical behaviour of UNS N08031 stainless steel in a contaminated phosphoric acid solution were evaluated. Stabilisation of the passive film was studied by potentiodynamic polarisation curves, potentiostatic tests, electrochemical impedance spectroscopy (EIS) measurements, Mott–Schottky analysis and X-ray photoelectron spectroscopy (XPS). The stability of the passive film was found to decrease as temperature increases. The film formed on the stainless steel surface was a n-type semiconductor and the XPS spectrum revealed the presence of fluoride ions
The passivation behavior of AISI 430 ferritic stainless steel was investigated in concentrated alkal...
In this study, the effect of solution pH on the electrochemical behaviour of AISI 304 austenitic and...
AbstractIn this study, the effect of solution pH on the electrochemical behaviour of AISI 304 austen...
tThe influence of temperature and the effect of aggressive anions on the electrochemical behaviour o...
The electrochemical behaviour of the highly alloyed austenitic stainless steel UNS N08031 (Alloy 31)...
The influence of temperature (20-80°C) on the electrochemical behaviour of passive films anodically ...
The influence of temperature (between 20 and 80 degrees C) on the electrochemical behaviour of UNS N...
The electrochemical behaviour of the highly alloyed austenitic stainless steel UNS N08031 (Alloy 31)...
cited By 0International audienceThe abrasion-corrosion behavior of the alloy 31 was tested at differ...
cited By 2International audienceThe effect of abrasive on electrochemical behaviour of passive film ...
The influence of temperature (20–80 °C) and chloride concentration (0.06–0.42 wt.% KCl) on the elect...
Polarization measurements were conducted to monitor the corrosion behavior of superduplex stainless ...
Polarization measurements were conducted to monitor the corrosion behavior of superduplex stainless ...
Alloy 22, a Ni-Cr-Mo alloy, is the candidate material for fabrication of canisters for disposal of h...
Mott–Schottky analysis and electrochemical and X-ray photoelectron spectroscopy (XPS) measurements w...
The passivation behavior of AISI 430 ferritic stainless steel was investigated in concentrated alkal...
In this study, the effect of solution pH on the electrochemical behaviour of AISI 304 austenitic and...
AbstractIn this study, the effect of solution pH on the electrochemical behaviour of AISI 304 austen...
tThe influence of temperature and the effect of aggressive anions on the electrochemical behaviour o...
The electrochemical behaviour of the highly alloyed austenitic stainless steel UNS N08031 (Alloy 31)...
The influence of temperature (20-80°C) on the electrochemical behaviour of passive films anodically ...
The influence of temperature (between 20 and 80 degrees C) on the electrochemical behaviour of UNS N...
The electrochemical behaviour of the highly alloyed austenitic stainless steel UNS N08031 (Alloy 31)...
cited By 0International audienceThe abrasion-corrosion behavior of the alloy 31 was tested at differ...
cited By 2International audienceThe effect of abrasive on electrochemical behaviour of passive film ...
The influence of temperature (20–80 °C) and chloride concentration (0.06–0.42 wt.% KCl) on the elect...
Polarization measurements were conducted to monitor the corrosion behavior of superduplex stainless ...
Polarization measurements were conducted to monitor the corrosion behavior of superduplex stainless ...
Alloy 22, a Ni-Cr-Mo alloy, is the candidate material for fabrication of canisters for disposal of h...
Mott–Schottky analysis and electrochemical and X-ray photoelectron spectroscopy (XPS) measurements w...
The passivation behavior of AISI 430 ferritic stainless steel was investigated in concentrated alkal...
In this study, the effect of solution pH on the electrochemical behaviour of AISI 304 austenitic and...
AbstractIn this study, the effect of solution pH on the electrochemical behaviour of AISI 304 austen...