The effects of fibre and matrix chemistry on the interface microstructure and stability of Ti-based composites were investigated using Sigma SiC monofilaments as reinforcements and different titanium alloys, namely Ti-6Al-4V, Ti-1100 and Super-α2, as matrices. Both monomatrix composites and 'hybrid' composites were processed by a solid-state diffusion-bonding technique, respectively incorporating either one type of matrix or different matrices into a single sample. Interface microstructures and reaction were analysed with respect to the reactivities of the interfaces and the diffusivities of the relevant elements involved. When the coated fibre was used, TiB needles were found in Ti-6Al-4V and Ti-1100 matrices but not in the Super-α2 matrix...
changes in fibre-matrix interface during the heat treatment of Ti6Al4V matrix reinforced with carbon...
International audienceThe development of titanium-based composites has been hindered largely because...
The examined composite has the Ti6Al4V matrix reinforced by unidirectional SiC fibers (SCS-6) whose ...
An investigation has been made of diffusion bonding at the interface between a local reinforcing met...
The Ti6Al4V-SiCf composite, consisting of Ti6Al4V matrix reinforced by unidirectional SiC fibres (se...
The composite of Ti6Al4V alloy, reinforced by unidirectional SiC fibres coated with graphite, is a p...
The composite of Ti6Al4V alloy, reinforced by unidirectional SiC fibres coated with graphite, has be...
Communication to : AGARD Congress on Metallic Matrix Composites, Bordeaux (France), September 27-30,...
This thesis is not available on this repository until the author agrees to make it public. If you ar...
Several composite systems made of titanium matrix reinforced with silicon carbide fiber were investi...
The paper reports results from an on going study of the interfaces in diffusion bonded Ti-6Al-4VlSig...
The extent of interfacial reaction after short-term thermal exposure during vacuum plasma spraying (...
The paper reports results from an on going study of the interfaces in diffusion bonded Ti-GAl-4V/Sig...
SiC-fibre reinforced titanium matrix composites are marked by exceptional high specific strength and...
changes in fibre-matrix interface during the heat treatment of Ti6Al4V matrix reinforced with carbon...
International audienceThe development of titanium-based composites has been hindered largely because...
The examined composite has the Ti6Al4V matrix reinforced by unidirectional SiC fibers (SCS-6) whose ...
An investigation has been made of diffusion bonding at the interface between a local reinforcing met...
The Ti6Al4V-SiCf composite, consisting of Ti6Al4V matrix reinforced by unidirectional SiC fibres (se...
The composite of Ti6Al4V alloy, reinforced by unidirectional SiC fibres coated with graphite, is a p...
The composite of Ti6Al4V alloy, reinforced by unidirectional SiC fibres coated with graphite, has be...
Communication to : AGARD Congress on Metallic Matrix Composites, Bordeaux (France), September 27-30,...
This thesis is not available on this repository until the author agrees to make it public. If you ar...
Several composite systems made of titanium matrix reinforced with silicon carbide fiber were investi...
The paper reports results from an on going study of the interfaces in diffusion bonded Ti-6Al-4VlSig...
The extent of interfacial reaction after short-term thermal exposure during vacuum plasma spraying (...
The paper reports results from an on going study of the interfaces in diffusion bonded Ti-GAl-4V/Sig...
SiC-fibre reinforced titanium matrix composites are marked by exceptional high specific strength and...
changes in fibre-matrix interface during the heat treatment of Ti6Al4V matrix reinforced with carbon...
International audienceThe development of titanium-based composites has been hindered largely because...
The examined composite has the Ti6Al4V matrix reinforced by unidirectional SiC fibers (SCS-6) whose ...