Optimisation of fin selection and thermal design of counter-current plate-fin heat exchangers

A major challenge in designing optimal multi-stream plate-fin heat exchangers is the large number of combination of standardised fin geometries for various fin types to choose from, which adds discrete aspects to an already complicated design problem. In this work, a new design algorithm is proposed to address this issue. By treating basic fin geometries such as plate spacing, fin pitch, fin length, fin thickness as continuous variables for all the fin types, different fin types are characterised based on the work published by different researchers. Then by taking into account thermal hydraulic performance of different fin types, optimal fin types and their corresponding design parameters can be obtained simultaneously by minimising the total volume of heat exchanger. The design parameters can be rounded to the nearest standardised fin parts for a feasible design. A case study with a comparison of published results is carried out to demonstrate the effectiveness of the method