Active Fiber Bragg Grating Hydrogen Sensors for All-Temperature Operation

The use of liquid hydrogen as a fuel requires low-cost multipoint sensing of hydrogen gas for leak detection and location well below the 4% explosion limit of hydrogen. Herein is presented a multipoint in-fiber hydrogen sensor capable of hydrogen detection below 0.5% concentration with a response time of less than 10 s. Our solution entails use of a fiber Bragg grating (FBG) coated with a layer of hydrogen-absorbing palladium which, in turn, induces strain in the FBG in the presence of hydrogen. Infrared power laser light is used to induce heating in the palladium\ud coating which dramatically decreases sensor response time\ud and increases the sensor’s sensitivity at low temperatures. This technology promises an inexpensive fiber solution for a multipoint hydrogen detection array with only one fiber feed-through