Add to ORKGA new method for preparing LiLaNiO/gamma -Al2O3 monolithic catalyst was described and discussed. The catalyst, which was supported over the monolith, was evaluated in a POM to syngas process. Relative stable catalytic properties during the 120 hours operation at atmospheric pressure were found for the catalyst. Under the high space velocity of 9.0x10(4)l/(kg.h)(CH4), the conversion of methane came to 95.5%, and the selectivity of carbon monoxide was not below 96.0% at 1123 K when ratio of the feedstock (CH4/O-2) was equal to 2.0
In recent years, the monolithic material has been developed increasingly in the high performance liq...
NiO/gamma-Al2O3 catalysts were prepared by the impregnation and the sol-gel method. The sintering an...
The reactivity of a catalytic layer consisting of 3 wt.% of Pd/Co3O4 over an alumina monolith (100 c...
An in-situ modified sol-gel method for the preparation of a Ni-based monolith-supported catalyst is ...
Partial oxidation of methane and ethane to synthesis gas over a LiLaNiO/gamma-Al2O3 catalyst was inv...
The catalytic activity of 0.6 wt.% Pd catalysts supported on binary Al 2O 3-La 2O 3 oxides prepared ...
The catalytic performance, thermal stability, carbon deposition, crystal phase, catalyst surface com...
Considerable research has been conducted on monolithic catalysts for various applications. Strategie...
The kinetic behavior of partial oxidation of methane to syngas over a LiLaNiO/gamma -Al2O3 catalyst ...
Perovskite-based monolithic reactors have been studied for methane catalytic combustion. Monoliths h...
The deposition of V-based catalysts for the oxidative dehydrogenation of propane to propene on cordi...
We are presenting an effective method to prepare and test heterogeneous catalysts much faster than b...
The use of monoliths in chemical processes has been studied with the emphasis on liquid-phase hydrog...
NiO/gamma-Al2O3 catalysts were prepared by the impregnation and the sol-gel method. The sintering an...
The use of both the NiO/MgO/a-Al2O3 monolith catalyst and the autothermal reverse flow reactor for t...
In recent years, the monolithic material has been developed increasingly in the high performance liq...
NiO/gamma-Al2O3 catalysts were prepared by the impregnation and the sol-gel method. The sintering an...
The reactivity of a catalytic layer consisting of 3 wt.% of Pd/Co3O4 over an alumina monolith (100 c...
An in-situ modified sol-gel method for the preparation of a Ni-based monolith-supported catalyst is ...
Partial oxidation of methane and ethane to synthesis gas over a LiLaNiO/gamma-Al2O3 catalyst was inv...
The catalytic activity of 0.6 wt.% Pd catalysts supported on binary Al 2O 3-La 2O 3 oxides prepared ...
The catalytic performance, thermal stability, carbon deposition, crystal phase, catalyst surface com...
Considerable research has been conducted on monolithic catalysts for various applications. Strategie...
The kinetic behavior of partial oxidation of methane to syngas over a LiLaNiO/gamma -Al2O3 catalyst ...
Perovskite-based monolithic reactors have been studied for methane catalytic combustion. Monoliths h...
The deposition of V-based catalysts for the oxidative dehydrogenation of propane to propene on cordi...
We are presenting an effective method to prepare and test heterogeneous catalysts much faster than b...
The use of monoliths in chemical processes has been studied with the emphasis on liquid-phase hydrog...
NiO/gamma-Al2O3 catalysts were prepared by the impregnation and the sol-gel method. The sintering an...
The use of both the NiO/MgO/a-Al2O3 monolith catalyst and the autothermal reverse flow reactor for t...
In recent years, the monolithic material has been developed increasingly in the high performance liq...
NiO/gamma-Al2O3 catalysts were prepared by the impregnation and the sol-gel method. The sintering an...
The reactivity of a catalytic layer consisting of 3 wt.% of Pd/Co3O4 over an alumina monolith (100 c...