This paper had been presented for promotion at the University of Khartoum. To get the full text please contact the other at Zuhair Hassan Osman Elhaj Ahmed1 and Mohamed Abaker Ahmed2The main objective of this study was to find the adequate number of cane haulage (transport) units, as a function of grade ability (ability to go up slope). The study was conducted at New Halfa Sugar Factory, with a cane crushing rate of 5000 tons/day. A 150 hp tractor was used on 1 km hauling route as the most critical grade from the second main center up to the unloading platform. The route was divided into four sections with different grades. The grade of each section was measured with surveying equipment. The road combined resistance, that has to be o...
Materials handling is a very important aspect of post-harvest operation, the socio-economic value an...
Abstract: Kenya's sugar sector dates back to the early 1920s when it first began operations. Accordi...
Rosana G. Moreira, Editor-in-Chief; Texas A&M UniversityThis is a Technical article from Internation...
Rosana G. Moreira, Editor-in-Chief; Texas A&M UniversityThis is a paper from International Commissio...
AbstractThe rehabilitation works carried out in the Sennar sugarcane factory in Sudan, improved the ...
AbstractManual loading of sugarcane is expensive slow operation last for several hours, therefore, m...
Tillage operations for sugarcane production in Sudan are basically as they were in the late seventi...
Thesis (M.Sc.)-University of KwaZulu-Natal, Durban, 2008.The sugar industry transports in excess of ...
In South Africa, cane is delivered to the mill uniformly over the milling season and across all supp...
By approaching the 21 Century , Agricultural Engineering becomes one of the moat important technolog...
The sugar industry is Queensland's most significant rural industry and one of the most important agr...
The Australian sugar industry is a major part of the agricultural sector within Queensland and New S...
The aims of this research were to design and fabricate an inter-row cultivator for mounting on a med...
The sugar industry in Kenya has been in existence since the early 1920s. A report by the Export Proc...
Rosana G. Moreira, Editor-in-Chief; Texas A&M UniversityThis is a paper from International Commissio...
Materials handling is a very important aspect of post-harvest operation, the socio-economic value an...
Abstract: Kenya's sugar sector dates back to the early 1920s when it first began operations. Accordi...
Rosana G. Moreira, Editor-in-Chief; Texas A&M UniversityThis is a Technical article from Internation...
Rosana G. Moreira, Editor-in-Chief; Texas A&M UniversityThis is a paper from International Commissio...
AbstractThe rehabilitation works carried out in the Sennar sugarcane factory in Sudan, improved the ...
AbstractManual loading of sugarcane is expensive slow operation last for several hours, therefore, m...
Tillage operations for sugarcane production in Sudan are basically as they were in the late seventi...
Thesis (M.Sc.)-University of KwaZulu-Natal, Durban, 2008.The sugar industry transports in excess of ...
In South Africa, cane is delivered to the mill uniformly over the milling season and across all supp...
By approaching the 21 Century , Agricultural Engineering becomes one of the moat important technolog...
The sugar industry is Queensland's most significant rural industry and one of the most important agr...
The Australian sugar industry is a major part of the agricultural sector within Queensland and New S...
The aims of this research were to design and fabricate an inter-row cultivator for mounting on a med...
The sugar industry in Kenya has been in existence since the early 1920s. A report by the Export Proc...
Rosana G. Moreira, Editor-in-Chief; Texas A&M UniversityThis is a paper from International Commissio...
Materials handling is a very important aspect of post-harvest operation, the socio-economic value an...
Abstract: Kenya's sugar sector dates back to the early 1920s when it first began operations. Accordi...
Rosana G. Moreira, Editor-in-Chief; Texas A&M UniversityThis is a Technical article from Internation...