With naphthalene as a model compound, catalytic cracking experiments on biomass tar were made on Ni-dolomite catalysts. The performance of catalyst preparation, activity, coke formation and regeneration were analysed. The results showed that the ratio of the one-step conversion of naphthalene was 95% at space velocity 0.81 h(-1) and 700 degrees C; with saturated wet air as regeneration gas, the regeneration time was within 0.5 h; compared with thermal cracking at the same reaction temperature, the catalytic cracking was propitious to deep cracking of naphthalene. (c) 2004 Elsevier Ltd. All rights reserved
Summarization: Nickel-based catalysts were synthesized using gasification slag as an abundant and in...
Tars have been identified as one of the major impurities associated with the utilization of biomass ...
The paper aims to investigate an effective method of catalytic reforming of toluene using peat char-...
The complex mixture of gasified tar model (phenol, toluene, naphthalene, and pyrene) was steam refor...
Tar formation during biomass gasification is a major barrier to utilise the produced syngas, which c...
Catalytic steam reforming is a promising approach to address tar formation and improve hydrogen (H2)...
A process of pressurized gasification and power generation in a hybrid system of Solid Oxide Fuel Ce...
This work focuses on the removal of the tar derived from biomass gasification by catalytic steam ref...
The present paper deals with experimentation of ZrO2 and Al2O3-supported catalysts for conversion of...
Iron and nickel-based catalysts over an olivine support were prepared by different methods (thermal ...
Cracking of biomass tar was investigated over Ni/dolomite catalyst prepared by the incipient wetness...
SSCI-VIDE+ING+DLP:CTH:ATU:DFA:FRMInternational audienceThe steam reforming of methane was studied ov...
Abstract. Gasification of biomass and different types of waste now is considered as one of most pers...
Gasification of biomass is today facing several problems with the high amount of tar produced and co...
The aim of this study was to model the kinetic parameters for tar steam reforming using benzene as a...
Summarization: Nickel-based catalysts were synthesized using gasification slag as an abundant and in...
Tars have been identified as one of the major impurities associated with the utilization of biomass ...
The paper aims to investigate an effective method of catalytic reforming of toluene using peat char-...
The complex mixture of gasified tar model (phenol, toluene, naphthalene, and pyrene) was steam refor...
Tar formation during biomass gasification is a major barrier to utilise the produced syngas, which c...
Catalytic steam reforming is a promising approach to address tar formation and improve hydrogen (H2)...
A process of pressurized gasification and power generation in a hybrid system of Solid Oxide Fuel Ce...
This work focuses on the removal of the tar derived from biomass gasification by catalytic steam ref...
The present paper deals with experimentation of ZrO2 and Al2O3-supported catalysts for conversion of...
Iron and nickel-based catalysts over an olivine support were prepared by different methods (thermal ...
Cracking of biomass tar was investigated over Ni/dolomite catalyst prepared by the incipient wetness...
SSCI-VIDE+ING+DLP:CTH:ATU:DFA:FRMInternational audienceThe steam reforming of methane was studied ov...
Abstract. Gasification of biomass and different types of waste now is considered as one of most pers...
Gasification of biomass is today facing several problems with the high amount of tar produced and co...
The aim of this study was to model the kinetic parameters for tar steam reforming using benzene as a...
Summarization: Nickel-based catalysts were synthesized using gasification slag as an abundant and in...
Tars have been identified as one of the major impurities associated with the utilization of biomass ...
The paper aims to investigate an effective method of catalytic reforming of toluene using peat char-...