In this report we focus on the performance of the D0 central fiber tracker and preshower detectors during the high luminosity p{bar p} collisions at {radical}s = 1.96 GeV delivered by the Tevatron collider at Fermilab (Run IIb). Both fiber tracker and preshower detectors utilize a similar readout system based on high quantum efficiency solid state photo-detectors capable of converting light into electrical signals. We also give a brief description of the D0 detector and the central track trigger, and conclude with a summary on the central tracker performance
The performance of a scintillating fiber detector prototype for tracking under high rate conditions ...
The D0 silicon micro-strip tracker, which was installed for Run II of the Fermilab Collider, and an ...
AbstractThe D0 Luminosity Monitor (LM) employs scintillating wedges with photomultiplier tube readou...
Within the upgraded D0 detector at Fermi National Accelerator Laboratory, forward and central presho...
The D0 experiment was upgraded in spring 2006 to harvest the full physics potential of the Tevatron ...
submitted to NIM A. 142 pages, 77 figures. Version with high resolution figures is available at http...
The Fermilab collider program is undergoing a major upgrade of both the accelerator complex and the ...
Abstract The scintillating fiber tracker for the measurement of the polar coordinate θ for exper...
The D0 collaboration has undertaken an aggressive upgrade of its central tracking system. The existi...
The D0 preshower detector consists of scintillator strips with embedded wavelength-shifting fibers, ...
The DØ experiment enjoyed a very successful data-collection run at the Fermilab Tevatron collider be...
We describe upgrades to the readout system for the D0 Luminosity Monitor. The D0 Luminosity Monitor ...
A fast tracking trigger system based on a new scintillating fiber tracker is being built for the upg...
The advantages and possibilities of fiber technology for the detection of particles in 500 GeV e+e- ...
©2004 IEEE. Personal use of this material is permitted. However, permission to reprint/republish thi...
The performance of a scintillating fiber detector prototype for tracking under high rate conditions ...
The D0 silicon micro-strip tracker, which was installed for Run II of the Fermilab Collider, and an ...
AbstractThe D0 Luminosity Monitor (LM) employs scintillating wedges with photomultiplier tube readou...
Within the upgraded D0 detector at Fermi National Accelerator Laboratory, forward and central presho...
The D0 experiment was upgraded in spring 2006 to harvest the full physics potential of the Tevatron ...
submitted to NIM A. 142 pages, 77 figures. Version with high resolution figures is available at http...
The Fermilab collider program is undergoing a major upgrade of both the accelerator complex and the ...
Abstract The scintillating fiber tracker for the measurement of the polar coordinate θ for exper...
The D0 collaboration has undertaken an aggressive upgrade of its central tracking system. The existi...
The D0 preshower detector consists of scintillator strips with embedded wavelength-shifting fibers, ...
The DØ experiment enjoyed a very successful data-collection run at the Fermilab Tevatron collider be...
We describe upgrades to the readout system for the D0 Luminosity Monitor. The D0 Luminosity Monitor ...
A fast tracking trigger system based on a new scintillating fiber tracker is being built for the upg...
The advantages and possibilities of fiber technology for the detection of particles in 500 GeV e+e- ...
©2004 IEEE. Personal use of this material is permitted. However, permission to reprint/republish thi...
The performance of a scintillating fiber detector prototype for tracking under high rate conditions ...
The D0 silicon micro-strip tracker, which was installed for Run II of the Fermilab Collider, and an ...
AbstractThe D0 Luminosity Monitor (LM) employs scintillating wedges with photomultiplier tube readou...