Add to ORKGAn earlier set of experiments will be described briefly, in which plate flux compression generators were used to power a Plasma Focus. Currents, voltages and 'rundown times' obtained in these experiments are shown to agree well with a simple model. This same model is then used to show how dramatic operational improvements could be obtained with use of an appropriate fuse, provided the model remained valid
This paper includes a brief overview of the contributions and results of several groups working in p...
The study of plasma current sheath (PCS) in Mather-type configuration of Dense Plasma Focus (PF) in ...
Electric discharge within the magnetic flux compression generator (FCG) is one of the energy losses ...
Abstruct- Recent shadowgraph studies suggest that a target disc placed downstream of the anode of a ...
A models was developed to aid in the design and interpretation of explosive generator-driven dense p...
The voltage (V) and current (I) characteristics in a plasma focus gun are simulated to yield the cur...
A two concentric electrodes spherical plasma focus device is simulated using a snow plow model, depe...
A novel dense plasma focus configuration with two separate concentric current sheet run-down regions...
The plasma focus is a promising small-scale alternative to the huge Tokamak project in the developme...
An experimental study on plasma focus fusion mechanisms is presented in this paper. Simple diagnosti...
Contrary to the general expectation that performance of a plasma focus would progressively improve w...
During the past three decades, a wide variety of explosive-driven magnetic-flux compression generato...
The paper describes the principle and physical phenomena in plasma generators that are used in mater...
The Institute of Plasma Focus Studies was founded with the aim of using the Lee model code to assist...
The plasma focus is a source of pulsed radiation, which is of interest in various fields of physics ...
This paper includes a brief overview of the contributions and results of several groups working in p...
The study of plasma current sheath (PCS) in Mather-type configuration of Dense Plasma Focus (PF) in ...
Electric discharge within the magnetic flux compression generator (FCG) is one of the energy losses ...
Abstruct- Recent shadowgraph studies suggest that a target disc placed downstream of the anode of a ...
A models was developed to aid in the design and interpretation of explosive generator-driven dense p...
The voltage (V) and current (I) characteristics in a plasma focus gun are simulated to yield the cur...
A two concentric electrodes spherical plasma focus device is simulated using a snow plow model, depe...
A novel dense plasma focus configuration with two separate concentric current sheet run-down regions...
The plasma focus is a promising small-scale alternative to the huge Tokamak project in the developme...
An experimental study on plasma focus fusion mechanisms is presented in this paper. Simple diagnosti...
Contrary to the general expectation that performance of a plasma focus would progressively improve w...
During the past three decades, a wide variety of explosive-driven magnetic-flux compression generato...
The paper describes the principle and physical phenomena in plasma generators that are used in mater...
The Institute of Plasma Focus Studies was founded with the aim of using the Lee model code to assist...
The plasma focus is a source of pulsed radiation, which is of interest in various fields of physics ...
This paper includes a brief overview of the contributions and results of several groups working in p...
The study of plasma current sheath (PCS) in Mather-type configuration of Dense Plasma Focus (PF) in ...
Electric discharge within the magnetic flux compression generator (FCG) is one of the energy losses ...