This report summarizes work conducted by Clipper Windpower under the DOE Low Wind Speed Turbine project. The objective of this project was to produce a wind turbine that can lower the cost of energy
The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator covering work perfo...
The preliminary results of two projects in the development phase of reliable wind turbines designed ...
This paper discusses the development of wind energy technology past, present and future
This fact sheet describes a subcontract with Clipper Windpower Technology, Inc. to develop a new tur...
This document reports the technical results of the Next Generation Turbine Development Project condu...
This report provides results of wind tunnel aroacoustic tests conducted on a small wind turbine blad...
This report describes work conducted under a subcontract between NREL and Northern Power Systems to ...
A presentation made to the European Wind Energy Conference in Athens, Greece, February 27--March 2, ...
The independent testing project was established at the National Renewable Energy Laboratory to help ...
This report describes a three-bladed, upwind, variable-speed, variable blade-pitch-to-feather-contro...
This paper describes four small wind turbines installed in the Pacific Northwest under DOE/NREL's Re...
This paper describes NREL's new 225-kW dynamometer facility that is suitable for testing a variety o...
This report presents the results of a study conducted by Genesis Partners LP as part of the United S...
The objective of this project was to improve the amount of energy delivered by the wind turbine on A...
In the conceptual design task, several feasible wind generator systems (WGS) configurations were eva...
The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator covering work perfo...
The preliminary results of two projects in the development phase of reliable wind turbines designed ...
This paper discusses the development of wind energy technology past, present and future
This fact sheet describes a subcontract with Clipper Windpower Technology, Inc. to develop a new tur...
This document reports the technical results of the Next Generation Turbine Development Project condu...
This report provides results of wind tunnel aroacoustic tests conducted on a small wind turbine blad...
This report describes work conducted under a subcontract between NREL and Northern Power Systems to ...
A presentation made to the European Wind Energy Conference in Athens, Greece, February 27--March 2, ...
The independent testing project was established at the National Renewable Energy Laboratory to help ...
This report describes a three-bladed, upwind, variable-speed, variable blade-pitch-to-feather-contro...
This paper describes four small wind turbines installed in the Pacific Northwest under DOE/NREL's Re...
This paper describes NREL's new 225-kW dynamometer facility that is suitable for testing a variety o...
This report presents the results of a study conducted by Genesis Partners LP as part of the United S...
The objective of this project was to improve the amount of energy delivered by the wind turbine on A...
In the conceptual design task, several feasible wind generator systems (WGS) configurations were eva...
The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator covering work perfo...
The preliminary results of two projects in the development phase of reliable wind turbines designed ...
This paper discusses the development of wind energy technology past, present and future
DOI
Add to ORKG