This study investigates potential cost of energy reductions that might be achieved by designing active systems to mitigate loads throughout the wind turbine system
This project focuses on the design and implementation of an intelligent Explosive Ordinance Disposal...
With increasing concerns about energy independence, job outsourcing, and risks of global climate cha...
The Rankine cycles for commercial parabolic trough solar projects range in capacity from 13.5 MWe at...
An electronic converter is designed for an isolated renewable energy system. In this system, energy...
The goal of this project was to design a dynamometer to test a driveline generator. Dynamometer comp...
Ocean Thermal Energy Conversion (OTEC) systems are based on utilizing the temperature difference bet...
A three-inch mean diameter, two-stage turbine with partial admission in each stage was experimentall...
This study investigates the feasibility of multiple concepts for integrating wind turbines and rever...
Direct-current triboelectric nanogenerators (DC-TENG) harness the friction generated between dissimi...
This report provides a user's guide for the TurbSim code developed to provide a numerical simulation...
This report uses EnergyPlus simulations of each building in the 2003 Commercial Buildings Energy Con...
An integrated multidisciplinary optimization procedure is developed for application to rotary wing a...
A limited number of coating options for titanium gas turbine engine components were explored with th...
UnderGraduate Research GrantCounter Rotating Open Rotor (CROR) systems promise a light weight, fuel ...
Contract No. DE-AC36-08GO28308NOTICE This report was prepared as an account of work sponsored by an ...
This project focuses on the design and implementation of an intelligent Explosive Ordinance Disposal...
With increasing concerns about energy independence, job outsourcing, and risks of global climate cha...
The Rankine cycles for commercial parabolic trough solar projects range in capacity from 13.5 MWe at...
An electronic converter is designed for an isolated renewable energy system. In this system, energy...
The goal of this project was to design a dynamometer to test a driveline generator. Dynamometer comp...
Ocean Thermal Energy Conversion (OTEC) systems are based on utilizing the temperature difference bet...
A three-inch mean diameter, two-stage turbine with partial admission in each stage was experimentall...
This study investigates the feasibility of multiple concepts for integrating wind turbines and rever...
Direct-current triboelectric nanogenerators (DC-TENG) harness the friction generated between dissimi...
This report provides a user's guide for the TurbSim code developed to provide a numerical simulation...
This report uses EnergyPlus simulations of each building in the 2003 Commercial Buildings Energy Con...
An integrated multidisciplinary optimization procedure is developed for application to rotary wing a...
A limited number of coating options for titanium gas turbine engine components were explored with th...
UnderGraduate Research GrantCounter Rotating Open Rotor (CROR) systems promise a light weight, fuel ...
Contract No. DE-AC36-08GO28308NOTICE This report was prepared as an account of work sponsored by an ...
This project focuses on the design and implementation of an intelligent Explosive Ordinance Disposal...
With increasing concerns about energy independence, job outsourcing, and risks of global climate cha...
The Rankine cycles for commercial parabolic trough solar projects range in capacity from 13.5 MWe at...