Add to ORKGAn 8 GeV superconducting linear accelerator (SCL) has been proposed as a single stage H{sup -} injector into the Main Injector (MI) synchrotron[1]. This would be the highest energy H{sup -} multi-turn injection system in the world. An injection absorber is required to absorb a few percent o the incoming beam on a regular pulse by pulse basis. The requirements and conceptual design of an internal absorber, capable of steady state 6.5 kW is discussed
TUPPR088International audienceThe injection complex of the SuperB, B-factory project of INFN consist...
This paper reports on the feasibility study of a proton Super-Conducting Linac (SCL) as a driver gor...
Source at https://inspirehep.net/literature/1961952.In the framework of the CERN Large Hadron Collid...
An 8 GeV superconducting linear accelerator (SCL) has been proposed as a single stage H- injector in...
An 8 GeV superconducting linear accelerator (SCL) has been proposed [1] as a single stage H{sup -} i...
An 8 GeV superconducting linear accelerator (SCL) has been proposed as a single stage H{sup -} injec...
PIP-II is the Fermilab's flagship project to provide powerful, high-intensity proton beams to the la...
Upon the termination of the Fermilab Collider program, the current Recycler anti-proton storage ring...
The operation and performance of the new, 15 Hz, H{sup -} charge exchange injection system for the F...
The H- beam from the proposed LINAC4 will be injected into the four existing rings of the PS Booster...
The Fermilab Project X R&D program is focused on the design of a new proton source utilizing a s...
The Fermilab Main Injector is moving toward providing 400 kW of 120 GeV proton beams using slip stac...
Increasing the Fermilab Main Injector (MI) beam power above ~1.2 MW requires replacement of the 8 Ge...
For the LINAC4 project the PS Booster (PSB) injection system will be upgraded. The 160 MeV Hbeam wil...
A multi turn energy recovery linac based light source is under discussion. Using the superconductin...
TUPPR088International audienceThe injection complex of the SuperB, B-factory project of INFN consist...
This paper reports on the feasibility study of a proton Super-Conducting Linac (SCL) as a driver gor...
Source at https://inspirehep.net/literature/1961952.In the framework of the CERN Large Hadron Collid...
An 8 GeV superconducting linear accelerator (SCL) has been proposed as a single stage H- injector in...
An 8 GeV superconducting linear accelerator (SCL) has been proposed [1] as a single stage H{sup -} i...
An 8 GeV superconducting linear accelerator (SCL) has been proposed as a single stage H{sup -} injec...
PIP-II is the Fermilab's flagship project to provide powerful, high-intensity proton beams to the la...
Upon the termination of the Fermilab Collider program, the current Recycler anti-proton storage ring...
The operation and performance of the new, 15 Hz, H{sup -} charge exchange injection system for the F...
The H- beam from the proposed LINAC4 will be injected into the four existing rings of the PS Booster...
The Fermilab Project X R&D program is focused on the design of a new proton source utilizing a s...
The Fermilab Main Injector is moving toward providing 400 kW of 120 GeV proton beams using slip stac...
Increasing the Fermilab Main Injector (MI) beam power above ~1.2 MW requires replacement of the 8 Ge...
For the LINAC4 project the PS Booster (PSB) injection system will be upgraded. The 160 MeV Hbeam wil...
A multi turn energy recovery linac based light source is under discussion. Using the superconductin...
TUPPR088International audienceThe injection complex of the SuperB, B-factory project of INFN consist...
This paper reports on the feasibility study of a proton Super-Conducting Linac (SCL) as a driver gor...
Source at https://inspirehep.net/literature/1961952.In the framework of the CERN Large Hadron Collid...