Development of bearings for use in the SNAP I power conversion system is described. Liquid mercury, lubricated hydrosphere bearings were selected. Design and performance data are given along with conclusions. (J.R.D.
Design and application of tool-steel ball bearings to turboalternator and mercury pump of SNAP-8 ele...
SNAP II is the designation for a nuclear auxiliary power unit, designed primarily for utilization in...
Lecturepg. 65The replacement of conventional bearings with magnetic bearings in a canned motor pump ...
Investigations of materials for use in connection with the SNAP I mercury Rankine cycle power conver...
Development of the SNAP I power conversion system is described. The system is designed to convert th...
Turbine development for the SNAP I power conversion system is described. A three-stage axial flow tu...
SNAP 1 is the designation for the 0.5-kw nuclear auxiliary power supply intended for application in ...
S>Development of the condenser-radiator for use in the SNAP I power conversion system is described. ...
The increasing introduction of intermittent power sources combined with the de-regulation of electri...
Design details and test results of the jet-centrifugal mercury pump are presented. (auth
The key focus of this research was to investigate the bearing options most suited to operation in a...
Design, development, and test results to date on electromagnetic actuators for the SNAP 8 control-dr...
The rapid build-up of variable renewable power sources such as wind and solar are leading to increas...
The SNAP 7A battery and converter were subjected to the required shock, vibration and temperature te...
"UC-80 Reactors - General (TID-4500, 13th Ed.).""August 22, 1957.""Report No. BMI-1216."At head of t...
Design and application of tool-steel ball bearings to turboalternator and mercury pump of SNAP-8 ele...
SNAP II is the designation for a nuclear auxiliary power unit, designed primarily for utilization in...
Lecturepg. 65The replacement of conventional bearings with magnetic bearings in a canned motor pump ...
Investigations of materials for use in connection with the SNAP I mercury Rankine cycle power conver...
Development of the SNAP I power conversion system is described. The system is designed to convert th...
Turbine development for the SNAP I power conversion system is described. A three-stage axial flow tu...
SNAP 1 is the designation for the 0.5-kw nuclear auxiliary power supply intended for application in ...
S>Development of the condenser-radiator for use in the SNAP I power conversion system is described. ...
The increasing introduction of intermittent power sources combined with the de-regulation of electri...
Design details and test results of the jet-centrifugal mercury pump are presented. (auth
The key focus of this research was to investigate the bearing options most suited to operation in a...
Design, development, and test results to date on electromagnetic actuators for the SNAP 8 control-dr...
The rapid build-up of variable renewable power sources such as wind and solar are leading to increas...
The SNAP 7A battery and converter were subjected to the required shock, vibration and temperature te...
"UC-80 Reactors - General (TID-4500, 13th Ed.).""August 22, 1957.""Report No. BMI-1216."At head of t...
Design and application of tool-steel ball bearings to turboalternator and mercury pump of SNAP-8 ele...
SNAP II is the designation for a nuclear auxiliary power unit, designed primarily for utilization in...
Lecturepg. 65The replacement of conventional bearings with magnetic bearings in a canned motor pump ...
DOI
Add to ORKG