Add to ORKGA Monte-Carlo study of several Mu2e Production Solenoid (PS) absorber (heat shield) versions using the MARS15 code has been performed. Optimizations for material as well as cost (amount of tungsten) have been carried out. Studied are such quantities as the number of displacements per atom (DPA) in the helium-cooled solenoid superconducting coils, power density and dynamic heat load in various parts of the PS and its surrounding structures. Prompt dose, residual dose, secondary particle flux are also simulated in the PS structures and the experimental hall. A preliminary choice of the PS absorber design is made on the ground of these studies
Thesis: S.B., Massachusetts Institute of Technology, Department of Nuclear Science and Engineering, ...
The MICE coupling solenoids surround the RF cavities that are used to increase the longitudinal mome...
Ecient production and collection of a large number of muons is needed to make a neutrino factory bas...
The Muon-to-Electron (Mu2e) experiment at Fermilab, will seek the evidence of direct muon to electro...
Mu2e is a muon-to-electron conversion experiment being designed by an international collaboration of...
The muon cooling system is the costliest part of the proposed neutrino factory. A major cost item fo...
The Muon Ionization Cooling Experiment (MICE), an international collaboration sited at Rutherford Ap...
In the Neutrino Factory and Muon Collider muons are produced by firing high energy protons onto a ta...
Advisors: Nicholas A. Pohlman.Committee members: David Hedin; Pradip Majumdar.Includes bibliographic...
The general-purpose Compact Muon Solenoid (CMS) detector at the Large Hadron Collider (LHC) at CERN ...
PIP-II is the Fermilab's flagship project to provide powerful, high-intensity proton beams to the la...
A superconducting coupling magnet made from copper matrix NbTi conductors operating at 4 K will be u...
The Mu2e experiment at Fermilab has been approved by the Department of Energy to proceed developing ...
Muon ionization cooling to the required normalized rms emittance of 25 microns transverse, and 72 mm...
Abstract—The Muon-to-Electron conversion experiment (Mu2e), under development at Fermilab, seeks to ...
Thesis: S.B., Massachusetts Institute of Technology, Department of Nuclear Science and Engineering, ...
The MICE coupling solenoids surround the RF cavities that are used to increase the longitudinal mome...
Ecient production and collection of a large number of muons is needed to make a neutrino factory bas...
The Muon-to-Electron (Mu2e) experiment at Fermilab, will seek the evidence of direct muon to electro...
Mu2e is a muon-to-electron conversion experiment being designed by an international collaboration of...
The muon cooling system is the costliest part of the proposed neutrino factory. A major cost item fo...
The Muon Ionization Cooling Experiment (MICE), an international collaboration sited at Rutherford Ap...
In the Neutrino Factory and Muon Collider muons are produced by firing high energy protons onto a ta...
Advisors: Nicholas A. Pohlman.Committee members: David Hedin; Pradip Majumdar.Includes bibliographic...
The general-purpose Compact Muon Solenoid (CMS) detector at the Large Hadron Collider (LHC) at CERN ...
PIP-II is the Fermilab's flagship project to provide powerful, high-intensity proton beams to the la...
A superconducting coupling magnet made from copper matrix NbTi conductors operating at 4 K will be u...
The Mu2e experiment at Fermilab has been approved by the Department of Energy to proceed developing ...
Muon ionization cooling to the required normalized rms emittance of 25 microns transverse, and 72 mm...
Abstract—The Muon-to-Electron conversion experiment (Mu2e), under development at Fermilab, seeks to ...
Thesis: S.B., Massachusetts Institute of Technology, Department of Nuclear Science and Engineering, ...
The MICE coupling solenoids surround the RF cavities that are used to increase the longitudinal mome...
Ecient production and collection of a large number of muons is needed to make a neutrino factory bas...