This Sandia supported research project evaluated the potential improvement that 'condensing' supercritical carbon dioxide (S-CO{sub 2}) power cycles can have on the efficiency of Light Water Reactors (LWR). The analytical portion of research project identified that a S-CO{sub 2} 'condensing' re-compression power cycle with multiple stages of reheat can increase LWR power conversion efficiency from 33-34% to 37-39%. The experimental portion of the project used Sandia's S-CO{sub 2} research loop to show that the as designed radial compressor could 'pump' liquid CO{sub 2} and that the gas-cooler's could 'condense' CO{sub 2} even though both of these S-CO{sub 2} components were designed to operate on vapor phase S-CO{sub 2} near the critical po...
A systematic, detailed major component and system design evaluation and multiple-parameter optimizat...
International audienceThe supercritical CO2 (sc-CO2) cycle is being promoted worldwide by many R&D e...
Cogeneration, or combined heat and power (CHP), is the use of a heat engine or power station to simu...
Supercritical carbon dioxide (S-CO2) cycles are very perspective and they are researched globally. T...
Thesis (Sc. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 2004.Includes ...
Abstract In the present paper, the possibility of increasing the thermodynamic efficiency of an elec...
The use of S-CO2 as working fluid in a power cycle has been growing in recent years due to associate...
The supercritical carbon dioxide (S-CO2) is a possible cooling system for the new generations of nuc...
The supercritical carbon dioxide (S-CO2) cycle is regarded as a potential option for the next genera...
AbstractIn the present paper, the possibility of increasing the thermodynamic efficiency of an elect...
In the present paper, the possibility of increasing the thermodynamic efficiency of an electric ener...
This study indicates the technical feasibility of using supercritical carbon dioxide as a coolant fo...
There have been a number of studies involving the use of gases operating in the supercritical mode f...
Solar power tower technology can achieve higher temperatures than the most common commercial technol...
Recent research suggests that an emerging power cycle technology using supercritical carbon dioxide ...
A systematic, detailed major component and system design evaluation and multiple-parameter optimizat...
International audienceThe supercritical CO2 (sc-CO2) cycle is being promoted worldwide by many R&D e...
Cogeneration, or combined heat and power (CHP), is the use of a heat engine or power station to simu...
Supercritical carbon dioxide (S-CO2) cycles are very perspective and they are researched globally. T...
Thesis (Sc. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 2004.Includes ...
Abstract In the present paper, the possibility of increasing the thermodynamic efficiency of an elec...
The use of S-CO2 as working fluid in a power cycle has been growing in recent years due to associate...
The supercritical carbon dioxide (S-CO2) is a possible cooling system for the new generations of nuc...
The supercritical carbon dioxide (S-CO2) cycle is regarded as a potential option for the next genera...
AbstractIn the present paper, the possibility of increasing the thermodynamic efficiency of an elect...
In the present paper, the possibility of increasing the thermodynamic efficiency of an electric ener...
This study indicates the technical feasibility of using supercritical carbon dioxide as a coolant fo...
There have been a number of studies involving the use of gases operating in the supercritical mode f...
Solar power tower technology can achieve higher temperatures than the most common commercial technol...
Recent research suggests that an emerging power cycle technology using supercritical carbon dioxide ...
A systematic, detailed major component and system design evaluation and multiple-parameter optimizat...
International audienceThe supercritical CO2 (sc-CO2) cycle is being promoted worldwide by many R&D e...
Cogeneration, or combined heat and power (CHP), is the use of a heat engine or power station to simu...