High temperature alloys are reviewed, focusing on current superalloys and their coatings. The synthesis, characerization, and oxidation performance of a NiAl–TiB{sub 2} composite are explained. A novel coating process for Mo–Ni–Al alloys for improved oxidation performance is examined. The cyclic oxidation performance of coated and uncoated Mo–Ni–Al alloys is discussed
Oxidation behavior of a Re-based diffusion barrier/Ni–Al coated single-crystal (SC) Ni-based TMS-82+...
In this paper, TWL12 + TWL20 inorganic salt aluminum coating was sprayed on the surface of Ni-based ...
AbstractTitanium aluminide alloys have been considered as the candidates to substitute nickle-base s...
Ni-based superalloys have been the workhorse materials in the high temperature alloy industry. Furth...
This thesis reports on investigations of high temperature oxidation resistant aluminide diffusion co...
The Author(s) 2010. This article is published with open access at Springerlink.com Abstract Oxidatio...
AbstractAl, Al-Si and Cr-Al-Si coatings are prepared onto IC20 alloy by powder pack cementation to i...
Oxidation behavior of the uncoated base, Ni–Al coated and Re–Cr-Ni plus Ni–Al coated single-crystal ...
Materials for high-pressure turbine blades must be able to operate in the high-temperature gases (ab...
With increasing challenges from energy and climate, it is critical to reduce the emission of greenho...
AbstractFour modified Al diffusion coatings (Al, Cr–Al, Al–Si and Cr–Al–Si coatings) were prepared o...
Abstract.- Plasma spray techniques have been used to increase the Al content on existing NiCoCrAlY f...
Materials for high-temperature turbine environments face rigorous operating conditions. Not only are...
Providing attractive properties such as low density, high specific stiffness, high specific yield st...
In the present study, Ni/Ni–Co–Al composite coatings were developed by a potentially simple, scalabl...
Oxidation behavior of a Re-based diffusion barrier/Ni–Al coated single-crystal (SC) Ni-based TMS-82+...
In this paper, TWL12 + TWL20 inorganic salt aluminum coating was sprayed on the surface of Ni-based ...
AbstractTitanium aluminide alloys have been considered as the candidates to substitute nickle-base s...
Ni-based superalloys have been the workhorse materials in the high temperature alloy industry. Furth...
This thesis reports on investigations of high temperature oxidation resistant aluminide diffusion co...
The Author(s) 2010. This article is published with open access at Springerlink.com Abstract Oxidatio...
AbstractAl, Al-Si and Cr-Al-Si coatings are prepared onto IC20 alloy by powder pack cementation to i...
Oxidation behavior of the uncoated base, Ni–Al coated and Re–Cr-Ni plus Ni–Al coated single-crystal ...
Materials for high-pressure turbine blades must be able to operate in the high-temperature gases (ab...
With increasing challenges from energy and climate, it is critical to reduce the emission of greenho...
AbstractFour modified Al diffusion coatings (Al, Cr–Al, Al–Si and Cr–Al–Si coatings) were prepared o...
Abstract.- Plasma spray techniques have been used to increase the Al content on existing NiCoCrAlY f...
Materials for high-temperature turbine environments face rigorous operating conditions. Not only are...
Providing attractive properties such as low density, high specific stiffness, high specific yield st...
In the present study, Ni/Ni–Co–Al composite coatings were developed by a potentially simple, scalabl...
Oxidation behavior of a Re-based diffusion barrier/Ni–Al coated single-crystal (SC) Ni-based TMS-82+...
In this paper, TWL12 + TWL20 inorganic salt aluminum coating was sprayed on the surface of Ni-based ...
AbstractTitanium aluminide alloys have been considered as the candidates to substitute nickle-base s...
DOI
Add to ORKG